Special Offer
-
bFlash, Chiptuning hardware, News
bFlash Master
In stock
bFlash is a powerful solution developed for professional chiptuners, calibration engineers and control unit (ECU and TCU) repair shops. bFlash includes multi-method control unit programming, datalogging, diagnostic and real time tuning ability.
SKU: MSG.BF.MASTER -
Jaltest
Jaltest AGV – diagnoscope for agricultural machinery
8 in stock
Jaltest AGV – diagnoscope for agricultural machinery. Its greatest advantage is undoubtedly the guided diagnostics. This interface will guide you through each step of the diagnostics. It will suggest the elements to be checked when a given error is registered, and in a quick and clear way it will display all the necessary electric diagrams, so that the source of the problem is diagnosed as soon as possible.
Annual subscription cost 545 EUR exc. Tax
Additionally, you can equip your set with any cables you like.
SKU: 70001060 -
Chiptuning software, EVC (WinOLS)
WinOLS software full version OLS505
In stock
OLS505 is a full version of the software which allows you to sell files, mass export or create scripts and customer databases. WinOLS is the most professional software created to modify the content of ECU memory. WinOLS makes it easy to search for maps, which you can then name and browse in various ways and change.
SKU: MSG.EVC.OLS505.Full.1 -
Chiptuning hardware, Programmers, Sale
Flex MASTER – FULL SW Package
95 in stock (can be backordered)
The subject of sale is the FLEX device with all available protocols in Master mode. The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: FLS0.5M -
-
Dyno, Road
DynoPRO road test dyno
2 in stock (can be backordered)
DynoPro is a road test bench for measuring power, torque, acceleration and other parameters of passenger cars and other combustion or electric vehicles. Measurements can be made on vehicles with any type of drive. No power limit for the measured vehicle. The dynamometer is intended for use in widespread motorsport by professionals.
SKU: MSG.dynoPRO.1 -
DFB Technology, Sale
DFOX Master Full ECU cars bikes agri trucks boats
In stock
A complete tool for reading and programming engine control units via OBD and via the Boot mode andJtag systems. Full system and Bench mode also available. A unique solution for the mechatronics.TCU package for automatic transmissions available.For other configurations please Contact Us.
SKU: MSG.DFB.MAFE.CBATB.1 -
AutoVEI
AutoVEI TRUCK EXPLORER MB FULL 2023
3 in stock
Full set of functions and hardware for trucks with Mercedes engines.
A kit is best for professionals who mostly works with Mercedes, KAMAZ, MAZ, CLAAS, PONSSE, GROOVE trucks/buses/tractors.
MAN and IVECO not included, but could be added later.SKU: D2251K0003
-
Chiptuning software, Sale
SWIFTEC FULL PACK
In stock
The available modules allow costumers to perform many unique modifications such as AGS removal, BMS/BPCM Recovery, DPF removal, DTC removal, AdBlue removal, Burbles Activation, Popcorn Activation, IMMO removal, Cold Start Noise Reduction, Hot Start Fix, Boost Sensor Calibration, Kickdown Deactivation, Sport Displays Calibration, Flaps removal, MAF removal, EGR removal, Lambda/O2 removal, Speed Limiter removal, all at the click of a button, making the job that was previously very hard in one single operation.
Swiftec is evolving with the car market and we are always looking
SKU: n/a -
DFB Technology, Sale
DFOX Master Full ECU cars bikes agri trucks boats
In stock
A complete tool for reading and programming engine control units via OBD and via the Boot mode andJtag systems. Full system and Bench mode also available. A unique solution for the mechatronics.TCU package for automatic transmissions available.For other configurations please Contact Us.
SKU: MSG.DFB.MAFE.CBATB.1 -
Dyno, Programmers, Road
FLEX OBD/BENCH MASTER + road dyno DynoRoad
In stock
DynoRoad is an innovative mobile car dyno that measures power and torque in both electric and traditional vehicles via an app installed on your mobile device. This road dyno is so small and compact you can always have it with you and it can be installed on your car in just two minutes.
SKU: MSG.FLS0.1M-DNR1.1.SET.1 -
Chiptuning accessories, News, Others, Uncategorized
RaceBox Mini-25Hz-acceleration measurement
Please contact us before purchase/ Prosimy o kontakt przed zakupem
RaceBox Mini-25Hz-acceleration measurement, is the smaller brother of the well-known Racebox. The Mini version is equipped, as much as 25Hz GPS module, that means that the module registers its position 25 times per second – such a high frequency provides very accurate measurements. It is certainly one of the most advanced and precise Lap timers on the market.
SKU: MSG.RACEBOX.MINI.1
-
Electronics, News
GYSFLASH 102.12 HF (5.0m Cables)
2 in stock
Specifically designed to be fitted on a wall or on a car lift, the vertical GYSFLASH 102.12 is a very
powerful inverter battery charger able to supply up to 100A. The GYSFLASH 102.12 will keep the
battery’s voltage perfectly stable at 12V during the diagnostic phases. It will deliver the best charging
cycle recommended for the maintenance of the most advanced vehicles on the market.SKU: GYSLFASH.10212.5M -
Cables/adapters, Chiptuning accessories
MG1CS003 MG1CS024 MG1CS201 BMW Bench universal cable
1 in stock
MG1CS003 MG1CS024 MG1CS201 BMW Bench universal cable for use with flasher tools ( terminated with pins). Used for easily connect to ECU’s without the risk of bending pins, and also saves a lot of time.
SKU: MSG.CTV.BENCH.MG.UNIV.1.1 -
-
-
-
Cables/adapters, Chiptuning accessories
MG1CS003 MG1CS024 MG1CS201 MD1CS001 BMW Bench Autotuner Cable
Cables/adapters, Chiptuning accessoriesMG1CS003 MG1CS024 MG1CS201 MD1CS001 BMW Bench Autotuner Cable
2 in stock
MG1CS003 MG1CS024 MG1CS201 MD1CS001 BMW Bench Autotuner Cable for use with flasher tool. Used for easily connect to ECU’s without the risk of bending pins, and also saves a lot of time.
SKU: MSG.CTV.BENCH.MG.AT.1.1 -
Products Grid
Best Sellers
Recently Added
BDM Frame
4 in stock
Frame for reading drivers in “boot mode” and using the BDM connector.
The frame has LED backlight and dowels for Bosch controllers.
The frame has linear bearings, blockage of the carriage height.
Made in CNC technology, ensuring precise positioning, powder coated which makes it durable in long operation.
Can be extended with an additional rear shelf for the programmer.
ECU Opener
4 in stock (can be backordered)
Device for opening the housing of Bosch controllers.
The use of 4/6 pcs of the tool depending on the controller housing provides much faster, safer and more convenient work with the ECU without damaging or deforming the housing.
Additional licence for OLS505 OLS505-License
In stock
he subject of the sale is the license for an additional station for users of the full version of the software (OLS505). WinOLS is the most professional software created to modify the content of ECU memory. WinOLS makes it easy to search for maps, which you can then name and browse in various ways and change.
Upgrade from WinOLS4 OLS501 to WinOLS 5 OLS505
In stock
Upgrade of one WinOLS4 OLS501 workstation to WinOLS 5 OLS505
WinOLS4 users with >= 12532 with WinOLS purchased after 01.04.2020: have the opportunity to upgrade to the WinOLS5 version free of charge.
If you have more than one workstation, please purchase the appropriate number of upgrades. If you do not know how many licences you have please contact us before purchasing