Magicmotorsport
Showing 1–40 of 46 results
-
-
Chiptuning hardware, Programmers
FLEX CONFIGURATOR
Available on backorder
SALE ! The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: MSG.MMS.FLXCONF.1 -
Dyno, Programmers, Road
FLEX Full Master+ road dyno DynoRoad
4 in stock
DynoRoad is an innovative mobile car dyno that measures power and torque in both electric and traditional vehicles via an app installed on your mobile device. This road dyno is so small and compact you can always have it with you and it can be installed on your car in just two minutes.
SKU: MSG.FLS0.5M-DNR1.1.SET.1 -
Chiptuning hardware, Dyno, Magicmotorsport, Programmers, Road
FLEX Full Master+ road dyno DynoRoad+Dragy
Chiptuning hardware, Dyno, Magicmotorsport, Programmers, RoadFLEX Full Master+ road dyno DynoRoad+Dragy
Out of stock
[:pl]DynoRoad to innowacyjna mobilna hamownia samochodowa, która mierzy moc i moment obrotowy zarówno w pojazdach elektrycznych, jak i spalinowych za pomocą aplikacji zainstalowanej na urządzeniu mobilnym. Małe i kompaktowe wymiary urządzenia pozwalają na jego łatwy transport, a sam montaż urządzenia zajmie Ci zaledwie dwie minuty.
Przydatne informacje o dostępnych wersjach urządzenia MagicMotorSport Flex oraz metodach odczytu sterowników dostępne TUTAJ[:en]DynoRoad to innowacyjna mobilna hamownia samochodowa, która mierzy moc i moment obrotowy zarówno w pojazdach elektrycznych, jak i spalinowych za pomocą aplikacji zainstalowanej na urządzeniu mobilnym. Małe i kompaktowe wymiary urządzenia pozwalają na jego łatwy transport, a sam montaż urządzenia zajmie Ci zaledwie dwie minuty.[:]
SKU: MSG.FLS1.1M-DNR1.1.DRG.SET.1 -
Chiptuning hardware, Programmers, Sale
Flex MASTER – FULL SW Package
92 in stock (can be backordered)
The subject of sale is the FLEX device with all available protocols in Master mode. The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: FLS0.5M -
Chiptuning hardware, Magicmotorsport, Programmers, Sale
FLEX MASTER+ Protocols ECU OBD + Bench
93 in stock (can be backordered)
The subject of sale is the FLEX device with protocols OBD (car, vans, bikes) + Bench in Master mode. The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: FLS0.1M -
Chiptuning hardware, Programmers
FLEX MASTER+ Protocols ECU/ TCU OBD + Bench
97 in stock (can be backordered)
The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: FLS0.1+2M -
Dyno, Programmers, Road
FLEX OBD/BENCH MASTER + road dyno DynoRoad
In stock
DynoRoad is an innovative mobile car dyno that measures power and torque in both electric and traditional vehicles via an app installed on your mobile device. This road dyno is so small and compact you can always have it with you and it can be installed on your car in just two minutes.
SKU: MSG.FLS0.1M-DNR1.1.SET.1 -
Chiptuning hardware, Programmers
FLEX SLAVE + Protocols ECU OBD + Bench
92 in stock (can be backordered)
The subject of sale is the FLEX device with protocols OBD (car, vans, bikes) Bench in Slave mode. The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: FLS0.1S -
Chiptuning hardware, Programmers
Flex SLAVE FULL SW Package
75 in stock (can be backordered)
The subject of sale is the FLEX device with all available protocols in Slave mode. The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: FLS0.5S -
Accessories / Cables, Chiptuning accessories
FLEX ToolCase
Out of stock
Even bigger, even more flexible. The new Flex ToolCase has been enlarged to carry all your most important mechatronic tools and accessories. It features four detachable inserts, each equipped with four internal pockets.
SKU: FLX8.31 -
-
Accessories / Cables, Chiptuning accessories, Magicmotorsport, News, Others
Kit Universal MAGBench FULL
Accessories / Cables, Chiptuning accessories, Magicmotorsport, News, OthersKit Universal MAGBench FULL
Out of stock
This Kit include: FLK08 allows connection with any ECU thanks to its slotted top panel and pogo pin probes. FLK04: Adapter kit for BDM programming.FLX4.10: Articulating Arm for FLEXible Bench. FLX4.10G: This adapter allows programming of vehicles from the Toyota group (including Denso 175822-xxx).
SKU: FLK10