Autel MaxiDIAG MD808 PRO

Professional diagnostic scanner from Autel model: MaxiDiag MD808 Pro with a large colour display and the possibility of updating. It is the only scanner on the market which offers a professional level of vehicle service at such a low price. It enables diagnostics of all electronic systems of a vehicle such as: Engine, Transmission, ABS, Airbag, Air Conditioning etc. Live Data, MD808 also supports service functions (description below), it also has all the functions of a typical OBD2 scanner.

2 years of free upgrades!

BASIC FUNCTIONS

• Controller identification
• Error reading
• Error deletion
• Parameter readout Live data

SERVICE FUNCTIONS

• Deletion of OIL Service inspections
• EPB parking brake service (replacement of brake pads)
• DPF service (burning out, replacement and other)
• Steering angle sensor SAS (coding, adaptation and other)
• Battery management system BMS (adaptations)
• THROTTLE throttle adaptation

SYSTEMs

• Engine
• Automatic transmission
• Airbags
• ABS
• Parking assist
• Cruise system ASC, DSC
• Air conditioning
• Counters, indicators
• Comfort modules
• Central locking
• Xenons
• Lighting module
• Seat module
• Immobilizer
• Cruise control
• Rain sensor, dusk sensor
• Sunroof
• Suspension
• Tyre pressure
• Radio
• Audio system
• Mirrors
• Steering wheel controls

and much more

Brands supported

EUROPA

• Abarth
• Alfa Romeo
• Audi
• Bentley
• BMW
• Bugatti
• Citroen
• Dacia
• Fiat
• Ford Europe
• Jaguar
• Lancia
• Land Rover
• Maserati
• Maybach
• Mini
• Mercedes Benz
• Opel
• Peugeot
• Renault
• Saab
• Seat
• Skoda
• Smart
• Sprinter
• Vauxhall
• Volkswagen
• Volvo

ASIA

• Acura
• Daewoo
• Honda
• Holden
• Hyundai
• Isuzu
• Infiniti
• Kia
• Lexus
• Mazda
• Mitsubishi
• Nissan
• Scion
• Subaru
• Suzuki
• Toyota

USA

• Chrysler (USA only)
• Ford USA
• GM

 OBD2 mode

Apart from the above-mentioned brands diagnostic mode the device additionally has all the functions of a typical OBD2 scanner. It works with all OBD II compliant vehicles, including those equipped with Control Area Network (CAN) protocol. The tester reads group codes: P0, P2, P3, U0, and characteristic codes P1, P3, U1, reads MIL (CHECK ENGINE) lamp status

PROTOCOLS

• ISO9141-2- KWP2000 slow init
• KWP2000 fast init
• PWM
• VPWM
• CAN 11bit/250kB
• CAN 11bit/500kB
• CAN 29bit/250kB
• CAN 29bit/500kB

FUNCTIONS

• Reading of manufacturers’ generic and characteristic codes,
• Reading of MIL (CHECK ENGINE) lamp status and the following indicators:
• Ignition interruption (Misfire monitor)
• Fuel system (Fuel System Mon)
• Component (CCM) (Comp. Component)
• EGR (Exhaust Gas Recirculation) system
• O2 sensors (Oxygen Sens Mon)
• Catalyst (Catalyst Mon)
• Evaporation system (EVAP System Mon)
• O2 Sensor Heater (Oxygen Sens htr)
• Secondary air (Sec Air System)
• Heated Catalyst (Htd Catalyst)
• A/C system (A/C Refig Mon)
• Online parameter readout also graphically (graphs)
• MIL (CHECK ENGINE) lamp reset
• Possibility of viewing frozen frames (FREEZE FRAME DATA)
• Reads VIN number in cars manufactured after 2002 (cars with module 9)

TECHNICAL SPECIFICATION

• Processor: ARM® Thumb® Processor (400 MHz)
• Memory: 32MB, 166 MHz
• Display: 4.0 inch LCD with 800×480 resolution
• Connectivity: Mini USB: 2.0 Micro SD Card (16GB)
• Current consumption: 1.7 W
• Operation Temp: -10°C to 60°C (14°F to 140°F)
• Storage Temp: -20°C to 70°C (-4°F to 158°F)
• Humidity: 5% – 95% non-condensing
• Construction: Strong plastic housing with protective rubber boot
• Dimensions: (W x H x D), , 202 mm x 92 mm x 35 mm (8.35″ x 3.62″ x 1.4″)
• Weight: 313 g (0.69 lb.)

Autel MaxiDIAG MD808 PRO CONTENTS

1. AUTEL MaxiDiag MD808 Pro scanner
2. Cable with OBD2 plug
3. Carrying case
4. Usb cable
5. User manual

We also offer: 

AUTEL MaxiDAS DS808

AUTEL MaxiDAS DS808BT