Chassis dynamometer MAHA 4WD MSR 500/2 PKW Allrad
MAHA GmbH
on its test benches at the factory, is constantly improving and introducing innovative solutions for even better control and reliable use by service workshops and technical inspection centres. The company’s range of products fully covers the needs of garages and test stations, from lifts, service and control equipment to modern exhaust gas measurement technology.
The possibility of networking individual devices as universal diagnostic lines results in The ability to network individual devices as universal diagnostic lines results in the creation of collective control protocols facilitating the diagnosis of various faults, which This makes MAHA a competent partner for vehicle and assembly and workshops worldwide.
Technical data of dyno MAHA 4WD MSR 500/2 PKW Allrad:
- Measurement of power at constant speed, speed, thrust
- Graphical, numerical representation of wheel power, losses, engine power
- Conversion of engine power according to DIN 70020, EEC 80/1269, ISO 1585, JIS D 1001, SAE J 1349
- Tachograph test program with load simulation and graphic evaluation:
- constant rotations, speed, thrust
- Driving simulation (cycles)
External measurement data:
- Ambient parameters: temperature, pressure, humidity, inlet air temperature
- Inputs for tachometer, oil temperature indicator (optional)
- Extensive possibilities to connect external data: pressure, temperature, OBD data, analogue data (optional modules)
- Possibility to connect an exhaust gas meter Maha MGT 5, MDO 2 LON (optional)
- Possibility to connect a Krupp- / AIC fuel consumption meter. For petrol and diesel (Option)
- Graphic display of measurement data over time
- Presentation of three measurement data in the background
Printout:
- Transparent A4 printout 126,589.00 1%
- Continuous or discrete power chart, also as tabular printout
Database:
- Data recording
- Data import and export
Remote control:
- control and operation
- air flow support and other options
- Standard control panel:
- MCD 2000 Eurosystem desktop
- Remote control with charger
Powder coating:
- Control cabinet – RAL 7040
- Side panels – RAL 7016
MSR 500/2 PKW ALLRAD rollers
- Electronically adjustable speed synchronisation of the front and rear rollers.
- Powder coating:
- Frame – blue RAL 5010,
- Rollers – red RAL 3003
- Covers – blue RAL 5010
- Setting the distance between axes by remote control (rear roller offset)
- Rollers:
- each roller with electric motor and eddy current brake
- Hydraulic roller adjustment
- Technical data of the console:
- Desktop dimensions 860 x 1,500 x 420 mm
- Power supply 3 x 400V
- Current protection 63 A
- Weight including packing 150 kg
- Power supply cabinet 800 x 1,000 x 400 mm
- Technical data of the rollers:
- Load capacity 2.5 t
- Weight approx. 1,300 kg
- Swivelling mass on rollers approx. 280 kg
- Rollers 750 mm long
- min. wheel base 700 mm
- max. wheel base 2,200 mm
- Roller diameter 504 mm
- Roller dimensions 1,095 x 3,324 x 512 mm
- Compressed air pressure max. 7 bar
- max. measuring speed 300 km / h
- Max. measuring power, rear axle (static) 260 kW, (dynamic) peak > 1,000 kW
- max. output, front axle (static) 260 kW, (dynamic) peak > 1,000 kW
- max. thrust, rear axle 6,000 N
- max. thrust, front axle 6,000 N
- Accuracy of power measurement +/- 2% of the measured value
- 2 x Electric motor 22 kW
Chassis dynamometer MAHA 4WD MSR 500/2 PKW Allrad can be additionally equipped with:
- Temperature and pressure reading module (CAN P2T2) – For reading 2 temperature values and 2 pressure values
- Oil temperature probe 100-1500mm with 6m cable
- OBD module (CAN-OBD) 5m cable 16-pin input
- Mounting elements for attaching the braked vehicle:
-
- 2x chain
- 2x long rope
- 2x short rope
- 4 x hook
- 2 lashing straps with tensioning clamps
- HTA 52×34 mm mounting rails must remain mounted and concreted in place according to supplier guidelines
- Anchorage points for M16 threaded rails in HTA
- Additional BOX 2 connector with additional space for 4 modules
- Module for analogue inputs – possibility to connect 4 analogue signals (current or voltage)
Also in our offer:
Hamownia WOM Eggers PT170 E
Hamownia drogowa DynoPRO waga najazdowa PROFORM 3200kg