Mobility and precision
The meticulous combination of electronic, technical and structural components has been perfected to provide mechatronic workshops with a solid and precise hub in any working condition.
The movement system, with a mixture of teflon and rubber wheels, makes it handy and easy to place in any workspace. In addition to that, its jointed axle makes the coupling procedure easier.
Each unit has an high-efficiency eddy current brake equipped with an optimized cooling system to ensure the best thermal and fluid-dynamic conditions.
The absence rollers and wheels increases safety up to the highest levels
Any parameter under control
Control Totem equipped with a last generation proprietary software, Full HD monitor, high-performance processor and emergency buttons.
Since the very first use to daily operations, mechatronics can have commands, features, and analytics tools at hand.
Modern interface and software
The modern and intuitive software stores the database of tested vehicles, it can start Sweep Test, Constant RPM/Speed/Traction tests, and allows operators to compare several results of different rollings.
Since the very first guided configuration, the proprietary software – constantly updating – coordinates data fluxes coming from electronic tabs of each hub
General information
Denomination | // | Hub Dynamometer for vehicles |
Model | // | Dynomag Hub |
General power supply voltage | [VAC ] | Three-phase: 400 |
General supply frequency | [Hz] | 50 |
Level of sound pressure in the workspace | [dB(A)] | < 70 |
Temperature in the workspace | [°C] | [0 ; + 40] |
Max. humidity in the workspace | [%] | 85 |
Possible transmissions | // | Manual, Automatic, CVT (lock mode) |
Totem
Operating voltage | [VAC ] | Three-phase: 400 |
Max. absorbed power | [A] | [A] |
Load type | // | Inductive |
Power output | [VAC ] | Three-phase: 5 x 400 Single-phase: 4 x 240 |
Max. output power | [A] | Individual three-phase (5 outputs): 20 / Total single-phase: 16 |
Safety systems | // | Differential circuit breaker:
Three-phase: 20 A curve C, IΔN = 0.03A Type A individual for each output Single-phase: 16 A curve C, IΔN = 0.03A Type AC overall |
Totem weight | [Kg] | 180 |
Max. Totem size | [mm] | 1720 x 950 x 920 |
Single HUB
Single-hub electric current | [A] | 16 |
Max. hub rotation | [rotation/min] | 3000 |
Max. braking torque | [Nm] | 1600 |
Max. Camber/Toe angles | [°] | -+ 8 |
Hub Weight | [Kg] | 500 |
Max. Hub size | [mm] | 1300 x 950 x 750 |
Wheels | // | Allow an easy tilting of the hub and facilitate its repositioning |
2WD configuration
Electric current | [A] | 32 |
Max. braking torque | [Nm] | 3200 |
Max. braking power | [CV/rpm] | 800 / 2000 of the axle |
Max. axle load | [Kg] | 3000 |