Laboratory power supply KORAD KA3010P 0-30V 10A communication with PC memory 5 power profiles
The KA3010P laboratory power supply is a stabilised power supply with programmable memory and stepless voltage regulation from 0 to 30V and stepless current regulation from 0-10A.
TRANSFORMER-BASED POWER SUPPLY DESIGN.
- It has surge protection as well as overload protection.
- The power supply has 5 memories for storing current, voltage and power supply modes.
- The only power supply with full current regulation rather than current limitation.
- The power supply has an accuracy of current indication up to 3 decimal places !!!
- Transformer-based design
- Connection to a computer via USB cable.
- RS-232 interface, USB interface
The KA3010P is cooled by a fan that runs non-stop and its speed is load-dependent.
Adjustment :
- Infinitely variable voltage over the entire range
- Continuous intensity adjustment over the entire range
- Switching the power supply on and off.
- 4 memory buttons (save, load)
- Coarse and fine adjustment of voltage,
- Coarse and fine adjustment of current
- Software control via USB
- Push-button locking function
MODELS:
- C.V. – constant voltage output
- C.C. – constant load current
PROTECTION:
- OVP – overvoltage protection
- OCP – overload protection
The power supply can operate in the following modes: C.V. – constant output voltage and C.C. constant load current. With two possible protections OVP (overvoltage protection) and OCP (overload protection).
The power supply is distinguished by large, precise LED displays that keep the current voltage and load up to date.
Setting the voltage as well as the current in a very convenient way by means of position selection buttons and a multi-turn potentiometer with which the desired value is selected.
Laboratory power supply specifications:
- Voltage range: 0-30 V
- Current range: 0-10 A
- RS-232 interface, USB interface
- Load adjustment
- Voltage: =< 0.01% +2mV
- Intensity: =
- Parameter setting accuracy
- Voltage: 10 mV
- Intensity: 1 mA
- Accuracy of settings
- Voltage. 0.5% +20mV
- Intensity. 0.5% +10mA
- Output voltage ripple
- Voltage: + 2mVrms
- Intensity: + 3 mArms
- Response time
- Voltage build-up: =< 100mS (Rated load 10%)
- Voltage drop: =< 100mS (Rated load 10%)
- Size : 110*156x*260 (W x H x L)
Kit includes:
- Laboratory power supply KA-3010P Korad
- USB cable
- Cables for the power supply
- Instruction manual