CAN Hacker – CH-P CANLIN bus interface full kit


Out of stock

Contents of the kit:

  • CAN-Hacker CH-P
  • 2x Channels CAN bus cable
  • LIN Bus cable
  • USB Cable
  • OBD cable

1,218.70 +VAT

Previous lowest price was 1,499.00.

Out of stock

CAN Hacker – CH-P CANLIN bus interface full kit

CAN Hacker is a universal twin channel CAN-USB interface. It comes with CAN analyzer software. The device will help you connect to the CAN bus, analyze the transmitted data and send your packets. Variuos options allow to significantly extend the functionality of the device at low price.

Technical characteristics CAN Hacker – CH-P CANLIN bus interface full kit:

  • CAN channels: 2 (-48V… 48V tolerant)
  • LIN channels: 1 (up to 48V tolerant)
  • Software-controlled terminators 120 OHm on the each CAN channels
  • Galvanic isiolation
  • Strong aluminium enclosure
  • Bandwidth: 8000 frames per second
  • PC interface: USB 2.0  Virtual COM Port, CDC class
  • Additional options:Leaf-Coder, CAN-CoderOBD2 Cable
  • Software: CARBUS Analyzer
  • Recommended OS: Windows 10

CAN-Hacker can help to solve the following tasks:

  1. Analyzing the work of CAN and LIN (optional) buses of cars and special purpose vehicles;
  2. Working on the bench with ECUs and vehicle units controlled by CAN and LIN buses (e.g. steering racks and EHPS/EPS units);
  3. Emulating the sensors and control units directly on the vehicle;
  4. Programming ECUs;
  5. Reverse engineering of CAN/LIN networks for vehicle monitoring and telemetry.

All these features are invaluable in the process of car repair, as well as during the installation and development of additional security, telematic and navigation equipment for any vehicle.

CAN Cable

  • Yellowblack– CAN-Low  channel 1
  • Yellowwhite– CAN-High channel 1
  • Orangeblack – CAN-Low channel 2
  • Orangewhite – CAN-High channel 2

LIN Cable

  • Red— 12 V
  • Black — GND
  • Blue— LIN

Main Connector Pinout

  1. CAN-Low, channel 1
  2. n.c.
  3. LIN
  4. 12V for LIN
  5. CAN-High, channel 2
  6. CAN-High, channel 1
  7. GND
  8. GND
  9. CAN-Low, channel 2


Additional options:

The following additional options are supported:

  1. LIN Bus Analyzer. Requires installation of an additional LIN module and activation by means of an activation code;
  2. CAN-Coder. Software for programming KIA Hyundai vehicles. Requires activation by means of an activation code and downloading a special firmware file;
  3. Leaf-Coder. Software for programming of Nissan Leaf ZE0 and AZE0 dashboards. Requires special firmware download;
  4. OBD2 cable. Allows easy connection of the interface to the standard OBD2 diagnostic plug.

Activation of additional options is done using the UBT program.


We also offer:

UCCB USB-CAN converter