PICO WPS500X pressure and vacuum sensor kit
The WPS500X is a pressure and vacuum sensor with a wide measuring range. With its uncompromising resolution and accuracy, you can make fast and precise diagnostic tests of various systems in your car.
- Accurate measurement up to 500 psi
- Ultra-fast response time: 100µs
- Zoom function and advanced analysis capabilities
- Built-in Li-Po battery
- Integrated safety valve
- Automatic zero reset
- High noise immunity
- Temperature compensation
- Przetwornik ciśnienia WPS500X oferuje ekstremalnie szybki czas reakcji (100us) na zmiany ciśnienia w zakresie 0-90% pełnej skali. Dolna granica czułości wynosi 0,07psi (5mbar), dzięki czemu możliwy jest dokładny pomiar szybkozmiennych ciśnień w szerokim zakresie.
Three measurement ranges
Range 1: The first range gives high resolution measurement at high pressures, such as cylinder pressure at start-up or during operation, and fuel system pressure.
Range 2: The second range (-15 to 50 psi, i.e. -1 to 3.45 bar) is ideal for measurements of vacuum in the intake system and fuel pressure. The “zoom” function is particularly helpful when measuring these systems.
Range 3: On the third range, pressures between -5 and 5 psi (approx. -0.34 and 0.34 bar) can be measured. The sensitivity of this range allows the analysis of pressure pulses in the exhaust system.
The zoom function works on the principle of an amplifier filter. It removes low-frequency components from the received signal (all signals whose speed does not exceed 100Hz) and then what remains of the signal is amplified 100 times. Thanks to the high accuracy of the sensor, it is possible to observe small pressure changes appearing against a background of larger changes. For example, the “zoom” function can be used to observe pressure changes caused by opening and closing valves (valve changes are faster than pressure changes in the intake manifold, so a large, slow cylinder pressure change will be removed and fast but small pressure oscillations caused by the valves will be amplified and displayed). Without the “zoom” function, such an observation would not be possible, because these changes would be invisible against the background of large changes in intake manifold pressure during engine operation.Zoom function
Our product eliminates the need to use different pressure transducers to measure pressures of different orders of magnitude. High resolution, accuracy, built-in rechargeable battery and robust housing make it the ideal instrument for automotive diagnostics.
If you are looking for an affordable price and a wide range of applications – the WPS500X self-diagnostic transmitter is the perfect solution for you, it is incomparable to any other instrument currently available on the market.
PICO WPS500X pressure and vacuum sensor kit includes:
- Pressure sensor WPS500X
- Carrying case
- USB cable
- BNC-BNC cable
- TA083: Fuel hose with large coupling
- TA117: Fuel hose with small coupling
- TA085: Vacuum hose
- TA086: Overflow hose
- TA087: Tube pressure hose
- TA213: Adapter-bolt M10 short 10mm
- TA216: Adapter-bolt M12 long 12mm
- TA217: M14 adapterrzelotle short 14mm
- TA218: M14 adapterrzelotle long 14mm
- TA212: High pressure hose
- TA129: Universal connector
Also on offer:
Be the first to review “PICO WPS500X pressure and vacuum sensor kit”
You must be logged in to post a review.