Is a professional tool for serial memory programming. It supports wide range of EEPROM, FLASH and FRAM devices with I2C, SPI, 1-Wire and MICROWIRE (uWire) protocols powered with 1.0V – 5.0V voltage levels. It has integrated ZIF socket (for THT devices) and SOIC socket (for SMD devices). It has also connector for in-circuit serial programming (ICSP) with buffered I/O. Due to USB 2.0 interface memory operations are incredibly fast.
reading / writing / erasing functions with user-friendly application interface,
supported binary files (*.bin, *.rom, *.epp etc.) and Intel-Hex (*.hex) with possibility to load file to the buffer, edit it, calculate checksums, export changes as patterns, swap-bytes, compare with chip etc.),
programming in socket or in external circuit (without unsoldering the chip – in system programming ISP),
the target application device can be either powered by REVELPROG (possibility to change VPP and logic levels: 1.0V / 1.5V / 1.8V / 2.5V / 2.8V / 3.3V / 5.0V) or powered by an application with external power supply (1.0 – 5.5V),
build in additional protection: buffered I/O pins internal connected only during programming + short circuit and overload protection (reduces the risk of damaging parts due to connection mistake),
all I/O internal-connected only during programming,
- additional useful tools such as: user patterns, script programming (i2c & spi bus pirate), checksums, auto backups, file comparing (DiffChecker) etc.
integrated sockets (ZIF + SOIC) with auto adaptive I/O pins reduces requirement of additional adapters,
short programming time , e.g. WINBOND W25Q80BV (8Mb): read 0.9s (8,4Mb/s), write 3.3s (2,4Mb/s), MICRON N25Q128A (128Mb): read 12.8s (10Mb/s), write 37.6s (3,4Mb/s), please check video programming examples
software and firmware upgrades are freely available for all users on the Internet.
Software is compatible with MS Windows XP, Vista, 7, 8 and 10 (32 and 64-bit).
Application interface is user-friendly. It has all buffer editor functions and also additonal features commonly used in car electronics and IT, such as swap-bytes, calculate checksums, saving changes to external files (as patterns), custom scripts maker for I2C/SPI (bus pirate), SFP editor etc. All main functions can be run directly from shortcut icons:
- REVELPROG-IS programmer (with integrated SOIC-8 150mil socket),
- In Circuit Serial Programming (ICSP) tape with “gold-pin” connectors,
- USB 2.0 1.8m cable.
We offer also:
DPF control – VAG CR Group + DIODE
Be the first to review “Programator Revelprog-IS”
You must be logged in to post a review.