-21%
,

Scanmatik 2 PRO

Availability:

25 in stock (can be backordered)


Scanmatik 2 PRO – can be used as a J2534 device with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210

 414.63  524.39 +VAT

Previous lowest price was  510.00.

25 in stock (can be backordered)

Scanmatik 2 PRO

Scanmatik 2 PRO

Scanmatik 2 PRO is a professional multibrand scanner designed for diagnostics of electronic control systems of American, European, Japanese and Russian vehicles. It can be used as a J2534 device with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

New features of Scanmatik 2 PRO:

  • Galvanic isolation of the USB port (with power);
  • Redesigned protection of K-lines and CAN buses on a new element base;
  • Increased speed of work via Bluetooth by about 20%;
  • Pulsed power supplies of the company’s own design (no heating, wide input voltage range from 5 to 55V);
  • Load-Dump power surge protection (when the generator is switched off on a running engine).

The widest support of J2534-1/2 standards:

  • Supply of programming voltage (5-24V) to the OBD connector pins: 6, 8, 11, 12, 13, 14;
  •  AUX programming voltage output (via an additional cable).

For full support of peripheral units on GM (GDS2) and VAZ/Renault cars:

  • An additional CAN bus on pins 12-13 running in 12H-13L or 12L-13H configuration.

The device works with a personal computer, tablet or smartphone. The software for Windows and Android are included in the package. When installing the driver (included) works with third-party software made for SAE J2534 and RP1210 standards. To connect to the adapter both USB and Bluetooth interfaces can be used (built into the Scanmatik 2 PRO adapter). The kit includes the full current version of the program (all currently available software modules): VAZ, GAZ, UAZ, Oka, ZAZ, Daewoo, Chevrolet, Ravon, Chery, BYD, Geely, Great Wall, Lifan, Mitsubishi, Kia, Hyundai, Izh, KAMAZ, MAZ, PAZ, OBD2. It works with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

SM2-PRO Adapter Specifications

  • Interfaces for communication with PC (Tablet, Smartphone) – USB or Bluetooth;
  • Power supply voltage: 5… 36V from the vehicle network or USB (galvanic isolation with power supply);
  • Current consumption, not more than 350mA;
  • Pulsed power supplies of the company’s own design (no heating, wide input voltage range from 5 to 55V);
  • Load-Dump power surge protection (when the generator is switched off on a running engine).
  • Supported data buses:
    • 13 x ISO-9141/ISO-14230 (K-LINE);
    • 1 x J1850VPW;
    • 1 x J1850PWM;
    • 4 x CAN;
    • 1 x Single Wire CAN.
  • Built-in multiplexer for switching diagnostic lines;
  • The widest support of J2534-1/2 standards;
  • Programming voltage supply (5-24V) to the OBD2 connector pins: 6, 8, 11, 12, 13, 14;
  • AUX programming voltage output (via an additional cable);
  • Bluetooth range, not less than: 10m (Class 2);
  • Adapter dimensions (L x W x H), not more than: 970×750×220mm;
  • Weight of the device in the basic configuration, not more than: 1 kg.

Scanmatik 2 PRO Compatibility Info

List of tested programs:

Allison DOC
BMW ISTA / Rheingold
Caterpillar Electronic Technician (CAT ET)
Chrysler Flash Application
Combiloader
Chiploader
Cummins Calterm III
Cummins Insite
Detroit DDDL
Eaton Service Ranger
ECU Flasher
Ford Module Programming Tool
Forscan
GM GDS-2/SPS
Honda HDS
Hino Diagnostic Explorer DX2
Jaguar/Land Rover SDD
JCB Service Master 4
MDFLASHER
Mercedes Xentry/DAS PassThru
MMC Flasher
Nissan Consult 3
Noregon JPRO
OpenBox
PCMFlash
Toyota Techstream
VAG ODIS Service
Volvo Premium Tech Tool
Volvo Vida
Wabco Toolbox