Корзина пуста.
SRS
Отображение 1–20 из 27
- Accessories adapters cables, Uniwersalne, Elektronika wyposażenie, SRS
AirBag tool and accessories storage case AST CPT Diagcar Airbag Service Tool
Accessories adapters cables, Uniwersalne, Elektronika wyposażenie, SRSAirBag tool and accessories storage case AST CPT Diagcar Airbag Service Tool
AirBag tool and accessories storage case AST CPT Diagcar Airbag Service Tool
AirBag Service Tool Case designed to contain tools and accessories.
All protected and in one place.
High quality made, protect Your electronic device and all accessories.
Case can be a great extension of your existing set, especially for people working outside the workshop.NOTE:
Empty Case. No device and cables inside.SKU: MS.AB.CAS - X-Tool
Cable Scania Continental EMS S8 MPC5566 BAM Bench
Scania Continental EMS S8 MPC5566 BAM Bench Cable
for use with flasher tool. Used to connect to ECUs without the risk of bending pins, and also saves a lot of time.
Connection with BOOT and CFG Signals if necessary for the tool.Total Length: (Approx) 1.5mSKU: MS.MPC5566.EMS - Dash, Keys, Multitool, Multitool, Multitool, Programmers, SRS
Car Interface and Programmer SMOK JTAG Full
Dash, Keys, Multitool, Multitool, Multitool, Programmers, SRSCar Interface and Programmer SMOK JTAG Full
The JTAG BDM + JGP1 JTAG Programmer is an advanced, multifunctional interface and programmer for SMOK automotive electronics. It provides comprehensive support for ECU/TCU controllers, dashboards, immobilizers, and post-accident systems. With it, you can perform professional repairs, programming, and data reading on a wide range of vehicles.
SKU: MS.Multitool.JTAG.FULL - AST, AST – AirBagServiceTool, Programmers, SRS, Subscriptions
CarProTool Airbag Service Tool (AST) One Mounth Subscription
AST, AST – AirBagServiceTool, Programmers, SRS, SubscriptionsCarProTool Airbag Service Tool (AST) One Mounth Subscription
CarProTool Airbag Service Tool (AST) one mounth Subscription. This is subscription for those who have already purchased Airbag Service Tool (AST)All you need to do is buy subscriptions and enter your serial number.
SKU: MSG.CPT.SUB.1MO - AST, AST – AirBagServiceTool, Programmers, SRS, Subscriptions
CarProTool Airbag Service Tool (AST) Six Mounth’s Subscription
AST, AST – AirBagServiceTool, Programmers, SRS, SubscriptionsCarProTool Airbag Service Tool (AST) Six Mounth’s Subscription
CarProTool Airbag Service Tool (AST) six mounth’s Subscription. This is subscription for those who have already purchased Airbag Service Tool (AST)All you need to do is buy subscriptions and enter your serial number.
SKU: MSG.CPT.SUB.6MO - AST, AST – AirBagServiceTool, Programmers, SRS, Subscriptions
CarProTool Airbag Service Tool (AST) Thre Yearly Subscription
AST, AST – AirBagServiceTool, Programmers, SRS, SubscriptionsCarProTool Airbag Service Tool (AST) Thre Yearly Subscription
CarProTool Airbag Service Tool (AST) Thre Yearly Subscription This is a 1095-day subscription for those who have already purchased Airbag Service Tool (AST)All you need to do is buy subscriptions and enter your serial number.
SKU: MSG.CPT.SUB.3YE - AST, AST – AirBagServiceTool, Programmers, SRS, Subscriptions
CarProTool Airbag Service Tool (AST) Two Yearly Subscription
AST, AST – AirBagServiceTool, Programmers, SRS, SubscriptionsCarProTool Airbag Service Tool (AST) Two Yearly Subscription
CarProTool Airbag Service Tool (AST) Two Yearly Subscription This is a 700-day subscription for those who have already purchased Airbag Service Tool (AST)All you need to do is buy subscriptions and enter your serial number.
SKU: MSG.CPT.SUB.2YE - Car / LCV, Chiptuning, Dash, Diagnostic tools, DiagProg5, DiagProg5, DiagProg5, DIAGPROG5, DiagProg5, Keys, Programmers, SRS
DiagProg5 Premium Package
Car / LCV, Chiptuning, Dash, Diagnostic tools, DiagProg5, DiagProg5, DiagProg5, DIAGPROG5, DiagProg5, Keys, Programmers, SRSDiagProg5 Premium Package
DiagProg5 is a modern generation of diagnostic testers from the renowned DiagProg series, designed for maximum flexibility, ease of use, and reliability. It combines advanced capabilities with an intuitive and straightforward interface. The device enables comprehensive diagnostics, repair, and programming of automotive modules, including airbag sensors, engine control units (ECU), as well as reading and clearing fault codes and resetting crash data. It also supports EEPROM and FLASH memory reading and programming.
SKU: MS.DiagProg5 - Chiptuning, Programmers, SRS, Universal programmers
MACACA Programator Mac Mpc Spc
The programmer allows you to work with the 3-bit memory embedded in Freescale Semiconductor’s 5xxx and 7xxx microcontrollers.
With the help of the programmer it will be possible to program :
- AIRBAG modules in cars of FORD, KIA, CHEVROLET, HONDA brands
- ECUs in cars of the brands MERCEDES, CHEVROLET, FORD
- ECUs of trucks
SKU: PROG.MACACA. - Dash, Keys, Multitool, Multitool, Multitool, Programmers, SRS
Multitool UHDS FULL – Car Interface and Programmer SMOK
Dash, Keys, Multitool, Multitool, Multitool, Programmers, SRSMultitool UHDS FULL – Car Interface and Programmer SMOK
UHDS FULL is an advanced, multifunctional interface and programmer for SMOK automotive electronics. It allows comprehensive handling of ECU/TCU controllers, dashboards, immobilizers, and crash data systems, both via the OBDII port and in bench mode (on the workbench). With UHDS FULL, you can perform professional repairs, programming, and data reading on a wide range of vehicles.
SKU: MS.Multitool.UHDS.FULL - Chiptuning, DiagProg5, DiagProg5, DiagProg5, DIAGPROG5, Keys, News, Programmers, SRS
DP4 Pakiet OBDII
Chiptuning, DiagProg5, DiagProg5, DiagProg5, DIAGPROG5, Keys, News, Programmers, SRSDP4 Pakiet OBDII
DP4 Package OBDII – set of Hardware and Software – is innovative diagnostic equipment used for diagnostics, repair, programming modules such as Airbag sensors, ECU, Anti-lock Braking System pump (ABS) and many more.
SKU: MSG.DP4.Pakiet.OBDII - CarPROG, Programmers, SRS
AirBag Service Start Pack
This complete set includes:
- CarProTool Programmer
- CPT Power Supply ( ACP12E NOKIA )
- CPT RJ48
- CCA 10PIN cable for connection to the airbag module via CAN on the table
- AirBag Service Tool USB Dongle ( AST USB KEY )
- AirBag Service Tool DUMP license for 1 year ( no limit, no tokens )
- AirBag CAN Service Tool 1 licence for 1 year ( no limit, no tokens )
- SmartOBD CAN Tool
- SmartOBD Power Adapter 2A
- CPT EEPROM SOIC 8 ADAPTER
- 10 PIN cable for SmartOBD Service Port ( to connect the SRS module on the table )
- 20 PIN cable for SmartOBD Service Port
- CPT CAN ADAPTER ( CCA )
- Power supply for CCA
SKU: MSG.DC.ABSERVICE.STARTER.1 - X-Tool
FLEX SLAVE + Protocols ECU OBD + Bench FLS0.1S
The object of sale is the FLEX FLK02.V02 device containing additional connectors and a cable with ECU OBD Bench protocols in Slave mode. The successor of the X17 device, it enables reading the contents of the controllers’ memory both via the OBD connector, in Bench and Boot mode. The primary function of the device is reading and writing flash and eeprom memory, as well as full cloning of engine and gearbox controllers. Ultimately, all protocols currently supported by the X17 module will be ported.
The kit includes the following connectors:
FLX4.2G: connectors for EMS3140, EMS3141, EMS3160, EMS3161, EMS3142
FLX4.2H: connectors for EDC17C49, EDC17C69, EDC7UC32, EDC7C1, EDC7C2, EDC7C3
FLX4.2I: connectors for MDG1
FLX4.2L: connectors for earthmoving machinery, trucks, agricultural machinery and construction vehicles, including Cummins CM2150C, Cummins CM2150EThe kit also includes the FLX2.14 cable: manufactured by Magicmotorsport, it allows the Flexbox to connect directly to the vehicle’s standard OBD port. This 44-pin connector accessory allows you to use the Flexbox touch button to select one of four available modes during bench programming and more.
The subject of sale is the FLEX device with protocols OBD (car, vans, bikes) Bench in Slave mode. The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: FLS0.1S-1
