No products in the cart.
Programmers, Keys, Xhorse
Key Tool MAX
Availability:
Avaliable in 3 days
Key Tool MAX – a compact and user-friendly device for handling all kinds of car keys. It is operated by a built-in touch display.
1,666.67zł +VAT Previous lowest price was 2,050.00zł.
Avaliable in 3 days
Key Tool MAX – a compact and user-friendly device for handling all kinds of car keys.
There is a variation of the KEY TOOL device with the MAX marking.
The device is operated by a built-in touchscreen LCD running under the ANDROID operating system.
Equipped with WI-FI and BLUETHOOTH module
Features that are available in the current version of Key Tool MAX::
Transponder reading
Copying of transponders with SNIFFER function (ID48 96 bit, ID46, ID 4D / 4C etc.)
Transponder pre-coding,
Super Transponder Xhorse support !!!
Cloning of remote controls
Parameterization of universal Smart Key (keyless)
Programming universal Xhorse remotes / keys (regular X series, wireless XN series, wireless Smart Key XS), including for the garage.
Test of remote controls
Immobilizer coil test at the ignition switch
Battery charging function in the key, e.g. BMW keys
Renewal of original keys (e.g. Audi, BMW, etc. !!! Connection diagrams can be found directly in the application)
The latest update has “our solution” for renewing BMW HUF5767 (434 Mhz) keys !!! – Keys that after refurbishment work with FEM / BDC !!!
The application allows you to control the MINI OBD device (soon on sale) that allows you to program keys for most brands via the OBD connector
Possibility to operate the Dolphin XP-005 milling machine
Cloning of identification cards / key fobs (opening intercoms etc.)
ID48 cloning 96 bit available after preparing about 10 Xhorse remote / universal keys. (the license will turn on automatically approximately two hours after the last required key fob / key is generated.) Remotes must be new and never programmed. After license activation, ID48 transponder cloning requires tokens – additionally payable.
The device will work with MINI OBD for key programming after OBD (at the moment, MINI OBD is not available. Please watch our website)
The set includes:
- Keytool MAX device
- 2x USB cable for charging the device (1x USB-C to USB-C, 1x USB to USB-C)
- 1 x remote control
- programming cable
- User manual
Updates are performed directly via the device itself without the need to connect to a PC.
At the moment, the device does not differ from its predecessor, the Key Tool, and even has an advantage over it through automatic notification of updates.
Attention: The cable for renewing the keys is not included !!!
We also offer:
Related products
- Promotions, Programmers, Chiptuning, MagicMotorSport – Flex
Flex SLAVE FULL SW Package FLS0.5S
20 in stock (can be backordered)
The subject of sale is the FLEX device with all available protocols in Slave mode. The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
SKU: FLS0.5S - Dynamometer, Programmers, Chiptuning, MagicMotorSport – Flex
FLEX Full Master+ road dyno DynoRoad+Dragy
Dynamometer, Programmers, Chiptuning, MagicMotorSport – FlexFLEX Full Master+ road dyno DynoRoad+Dragy
Out of stock
[:pl]DynoRoad to innowacyjna mobilna hamownia samochodowa, która mierzy moc i moment obrotowy zarówno w pojazdach elektrycznych, jak i spalinowych za pomocą aplikacji zainstalowanej na urządzeniu mobilnym. Małe i kompaktowe wymiary urządzenia pozwalają na jego łatwy transport, a sam montaż urządzenia zajmie Ci zaledwie dwie minuty.
Przydatne informacje o dostępnych wersjach urządzenia MagicMotorSport Flex oraz metodach odczytu sterowników dostępne TUTAJ[:en]DynoRoad to innowacyjna mobilna hamownia samochodowa, która mierzy moc i moment obrotowy zarówno w pojazdach elektrycznych, jak i spalinowych za pomocą aplikacji zainstalowanej na urządzeniu mobilnym. Małe i kompaktowe wymiary urządzenia pozwalają na jego łatwy transport, a sam montaż urządzenia zajmie Ci zaledwie dwie minuty.[:]
SKU: MSG.FLS1.1M-DNR1.1.DRG.SET.1 - Chiptuning, MagicMotorSport – Flex, Programmers
FLEX SLAVE + Protocols ECU OBD + Bench FLS0.1S
In stock
The object of sale is the FLEX FLK02.V02 device containing additional connectors and a cable with ECU OBD Bench protocols in Slave mode. The successor of the X17 device, it enables reading the contents of the controllers’ memory both via the OBD connector, in Bench and Boot mode. The primary function of the device is reading and writing flash and eeprom memory, as well as full cloning of engine and gearbox controllers. Ultimately, all protocols currently supported by the X17 module will be ported.
The kit includes the following connectors:
FLX4.2G: connectors for EMS3140, EMS3141, EMS3160, EMS3161, EMS3142
FLX4.2H: connectors for EDC17C49, EDC17C69, EDC7UC32, EDC7C1, EDC7C2, EDC7C3
FLX4.2I: connectors for MDG1
FLX4.2L: connectors for earthmoving machinery, trucks, agricultural machinery and construction vehicles, including Cummins CM2150C, Cummins CM2150EThe kit also includes the FLX2.14 cable: manufactured by Magicmotorsport, it allows the Flexbox to connect directly to the vehicle’s standard OBD port. This 44-pin connector accessory allows you to use the Flexbox touch button to select one of four available modes during bench programming and more.
Translated with DeepL.com (free version)
SKU: FLS0.1S
