No products in the cart.
Programmers, Keys, Xhorse
VVDI PROG programmer
Availability:
4 in stock
The VVDI PROG programmer is a universal tool that allows you to read, write and verify data stored in microprocessors of the series …
2,398.37zł +VAT Previous lowest price was 2,950.00zł.
4 in stock
VVDI PROG programmer
- Support for reading, writing and verifying saved data.
- MC9S08 series secured and unprotected
- MC68HC (9) 12 series secured and unsecured
- MC9S12 series secured and unprotected
- V850 series
- H8X series
- R8C series
- R5F series
- PCF79XX
- EEPROM SPI, I2C, μWIRE
- PIC 12F, 16F, 18F
- Infineon TRICORE
- Infineon XC2xxxx
- Infineon XC164CS
- ST10F series
- ST7 series
- STM8 series
- ATMEL-Atmega 8, 48, 16, 32, 64, 128, 256
- MPC560 series
- SPC560 series
- Fujitsu MB91F
- Reading BOSCH drivers on the driver connector (so-called bench) without booting, without disassembling !!! (additional BOSCH adapter required)
Compare files
PIN code calculator from file and incode / outcode (Mazda, Ford)
Renewal of used BMW E and F series keys (315 Mhz, 433Mhz, 868Mhz) with and without keyless
Support for reading ISN BMW engines N13, N20, N55, N63, S63
Support for reading VAG group controllers EDC17CP14, MED17.1, MED17.5, MED17.5.20
An extensive database of connection diagrams divided into appropriate sections
Very stable operation with 5M48H, 1N35H, 2M53J, 3M25J etc. masks (CAS 4, CAS 4 , BCM Porsche)
No subscription fees !!!
Updates completely free !!!
The programmer does not have any licenses !!!
A few videos showing the possibilities of the VVDI PROG Programmer::
- Read / Write CAS 4 in BMW
- ELV reading from Audi A8 (GR16)
- Audi Gateway Reading (NEC V850)
- HC08AZ32 reading (Airbag sensor)
The kit includes everything that is shown in the photos. Packed in a protective case.
We also offer:
Programmer VVDI 2
VVDI BMW TOOL programmer
Related products
- Promotions, Programmers, Chiptuning, MagicMotorSport – Flex
Flex MASTER – FULL SW Package + ToolCase FLX8.31
-8%
Promotions, Programmers, Chiptuning, MagicMotorSport – FlexFlex MASTER – FULL SW Package + ToolCase FLX8.31
In stock
The subject of the sale is the FLEX Full Master FLK02.V02 device including additional connectors and cable with all available protocols in Master mode. The successor of the X17 device, it allows the reading of the contents of the drivers’ memory both via the OBD connector, in Bench and Boot mode. The primary function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and gearbox controllers. Ultimately, all protocols currently supported by the X17 module will be ported.
The kit includes the following connectors:
FLX4.2G: connectors for EMS3140, EMS3141, EMS3160, EMS3161, EMS3142
FLX4.2H: connectors for EDC17C49, EDC17C69, EDC7UC32, EDC7C1, EDC7C2, EDC7C3
FLX4.2I: connectors for MDG1
FLX4.2L: connectors for earthmoving machinery, trucks, agricultural machinery and construction vehicles, including Cummins CM2150C, Cummins CM2150EThe kit also includes the FLX2.14 cable: manufactured by Magicmotorsport, it allows the Flexbox to be connected directly to the vehicle’s standard OBD port. This 44-pin connector accessory allows the Flexbox touch button to be used to select one of the four available modes during bench programming and beyond.
SKU: FLS0.5M - Promotions, Programmers, Chiptuning, MagicMotorSport – Flex
FLEX MASTER+ Protocols ECU OBD + Bench
-10%Promotions, Programmers, Chiptuning, MagicMotorSport – FlexFLEX MASTER+ Protocols ECU OBD + Bench
In stock
The object of sale is the FLEX FLK02.V02 device containing additional connectors and cable with ECU OBD Bench protocols in Master mode. The successor of the X17 device, it allows reading the contents of driver memory both through the OBD connector, in Bench and Boot mode. The main function of the device is reading and writing flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
Translated with DeepL.com (free version)
The kit includes the following connectors:
FLX4.2G: connectors for EMS3140, EMS3141, EMS3160, EMS3161, EMS3142
FLX4.2H: connectors for EDC17C49, EDC17C69, EDC7UC32, EDC7C1, EDC7C2, EDC7C3
FLX4.2I: connectors for MDG1
FLX4.2L: connectors for earthmoving machinery, trucks, agricultural machinery and construction vehicles, including Cummins CM2150C, Cummins CM2150EThe kit also includes the FLX2.14 cable: manufactured by Magicmotorsport, it allows the Flexbox to connect directly to the vehicle’s standard OBD port. This 44-pin connector accessory allows you to use the Flexbox touch button to select one of four available modes during bench programming and more.
SKU: FLS0.1M - Programmers, Chiptuning, MagicMotorSport – Flex
FLEX MASTER+ Protocols ECU/ TCU OBD + Bench
Available on backorder
The object of sale is the FLEX FLK02.V02 device containing additional connectors and cable with ECU/ TCU OBD Bench protocols in Master mode. The successor of the X17 device, it allows reading the contents of driver memory both through the OBD connector, in Bench and Boot mode. The primary function of the device is reading and writing flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.
The kit includes the following connectors:
FLX4.2G: connectors for EMS3140, EMS3141, EMS3160, EMS3161, EMS3142
FLX4.2H: connectors for EDC17C49, EDC17C69, EDC7UC32, EDC7C1, EDC7C2, EDC7C3
FLX4.2I: connectors for MDG1
FLX4.2L: connectors for earthmoving machinery, trucks, agricultural machinery and construction vehicles, including Cummins CM2150C, Cummins CM2150EThe kit also includes the FLX2.14 cable: manufactured by Magicmotorsport, it allows the Flexbox to connect directly to the vehicle’s standard OBD port. This 44-pin connector accessory allows you to use the Flexbox touch button to select one of four available modes during bench programming and more.
SKU: FLS0.1+2M
