, ,

Software Abrites AVDI Toyota Full

Availability:

Available on backorder


This package contains special functions TN009, TN014, TN015 and TN016

10,203.31 +VAT

Previous lowest price was 12,522.09.

Available on backorder

Abrites AVDI Toyota Full

TN009 allows the resetting of the ID code box available for ALL Toyota vehicles, including the latest generation manufactured after 2018, and for ID code boxes without external EEPROM.

The ID Code Box reset opens up a number of possibilities for those working on Toyota vehicles, mainly due to its location and the long time it takes to dismantle the vehicle until the ID Code Box is removed. These include

  • Key programming – vehicles manufactured after 2018, where key programming requires a new kit consisting of an ID code box, Smart system and keys, users can also use used Smart systems (with available keys) as a plug and play solution after resetting the ID code box.
  • Smart system damage – in this case, as with key programming, all modules will need to be replaced. Reset ID Code Box allows only the Smart system and keys to be replaced, so both new and used Smart systems can be used (used Smart systems must have keys available).

TN014 extends the key programming capabilities of the ABRITES software for the latest generation of Toyota vehicles equipped with the Tokai Rika Smart System with BA HT-AES keys.

Supported models:

  • Yaris 2020+ (XP210)
  • Yaris Cross 2021+ (XP210)
  • Corolla Facelift 2022+ (E210)
  • Corolla Cross Facelift 2022+ (XG10)

Including models already supported in the older TN011 licence:

  • Corolla 2018+
  • Camry 2018+
  • Highlander 2018+
  • Mirai 2020+

Depending on the type of transponder in the vehicle, an HT-AES (TA64) or DST-AES (TA68) emulator will be required. CB012 will also be required for the internal CAN-BUS connection to the vehicle.
An AVDI interface with a valid AMS subscription, ZN002 or ZN003 PROTAG V2 programmer is required to use this licence.

TN015 for key programming of Toyota vehicles manufactured after 2020, equipped with Denso Smart System with BA type DST-AES keys.

Functions:

  • Programming of backup keys
  • LOSS OF ALL KEYS

Supported models:

  • Sienna 2020+ (XL40)
  • Harrier/Venza 2020+ (XU80)
  • Tundra 2021+ (XK70)
  • Land Cruiser 2021+ (J300)
  • RAV4 Facelift 2022+ (XA50)

This includes models already supported by the older TN012 licence:

  • CH-R 2018+
  • Prius 2018+
  • Avalon 2018+
  • RAV4 2018+

No additional subscriptions (dealer access) are required to complete the key programming procedure.

A TA68 DST-AES emulator is required to perform the procedure. CB012 will also be required for the internal CAN-BUS connection to the vehicle.
An AVDI interface with a valid AMS subscription, ZN002 or ZN003 PROTAG V2 programmer is required to use this licence.

TN016 provides complete key programming software for the full range of Lexus vehicles manufactured after 2018. Even the latest 2022 RX and NX models with B9 DST-AES and Denso Smart System keys are supported.

Functions:

  • ALL KEYS LOST key programming
  • Programming of the spare key completely via OBDII

Supported models:

  • RX 2022+
  • NX 2021+
  • RXL 2018+
  • ES 2018+
  • LS 2018+
  • UX 2018+

To perform the procedures, a stable internet connection and a ZN002 or ZN003 PROTAG programmer are required, as well as a TA68 DST-AES transponder emulator and a CB012 cable set.

An AVDI with an active AMS is required to purchase and use this package.