-
×
KESS3 Master MARINE OBD В наличии
1 × 8,439.03zł -
×
UPA-USB programmer + adapter
2 в наличии
1 × 1,300.00zł -
×
Programmer MK3 FULL VERSION
Avaliable in 3 days
1 × 16,005.89zł
KESS3 Master MARINE OBD 
UPA-USB programmer + adapter 
Programmer MK3 FULL VERSION Подытог: 25,744.92zł (без НДС)
Accessories adapters cables
Отображение 81–100 из 454
- Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for Mercedes MG1CP002 ATUBA004
Professional bench cable for ECU programming in Mercedes-Benz – Bosch MG1CP002.
A high-quality bench cable designed for direct programming and diagnostics of Bosch MG1CP002 engine control units (ECUs) used in Mercedes-Benz vehicles. An essential piece of equipment for professional workshops specializing in diagnostics, tuning, and ECU repair.The cable enables a direct connection between the ECU and a diagnostic or programming device, without the need to install the ECU in the vehicle. This solution allows for convenient, safe, and fast work in workshop conditions.
SKU: ATUBA004 - Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for Toyota Denso Gen3 ATUBA006
The professional ATUBA006 cable is designed for Toyota Denso Gen3 ECUs, providing a safe and stable connection between the ECU and a programming device in bench mode.
This cable is engineered for tuning workshops, ECU service centers, and specialists involved in reading and writing engine control unit software.
It ensures a stable connection between the ECU and the AutoTuner interface, eliminating the risk of pin damage or electrical system issues.SKU: ATUBA006 - Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for VAG MD1CP004 ATUBA007
Professional Bench Cable ATUBA007 for Bosch MD1CP004/MD1CP014 ECUs in VAG group vehicles (VW, Audi, Škoda, Seat). Enables safe and fast reading and writing of the ECU memory in bench mode, without opening the ECU casing. Ideal for workshops, tuners, and service centers specializing in ECU diagnostics and programming. It allows you to connect to the ECU in bench mode safely and easily, eliminating the risk of damaging connectors and pins.
SKU: ATUBA007 - Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for VAG MD1CS004 ATUBA008
The specialist Bench Cable ATUBA008 is designed for use with Bosch MD1CS004 ECU units installed in VAG group vehicles (VW, Audi, Škoda, Seat). It allows for direct and safe connection of the ECU to diagnostic and programming tools in Bench mode, providing full access to the ECU memory and enabling advanced operations such as reading, writing, and modifying engine control maps.
Advantages:
- Full ECU access: Supports reading and writing of FLASH and EEPROM memory.
- Safe connection: Eliminates the risk of damaging ECU pins thanks to a stable bench connection.
- Professional use: Ideal for tuning workshops and service centers that work with ECU programming.
- Easy to use: Plug & Play with compatible programming tools that support Bench mode.
SKU: ATUBA008 - Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for VAG MG1CS001 – MG1CS111 ATUBA009
Accessories adapters cables, Autotuner, CablesCable Autotuner Bench for VAG MG1CS001 – MG1CS111 ATUBA009
Original AutoTuner Bench cable (ATUBA009) designed for direct connection to Bosch MG1CS001 and MG1CS111 engine control units used in VAG group vehicles (VW, Audi, Skoda, Seat).
It enables safe and stable operation in BENCH mode, without the need for communication via the OBD connector.SKU: ATUBA009 - Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for VAG MG1CS011 ATUBA012
Professional bench cable for programming and diagnosing the Bosch MG1CS011 ECU used in VAG group vehicles — Volkswagen, Audi, Škoda, Seat. It allows direct connection of the AutoTuner tool to the control unit in bench mode, significantly facilitating map reading and writing as well as diagnostics.
SKU: ATUBA012 - Accessories adapters cables, AutoVEI – Truck Explorer
Cable AutoVEI 2m. DC2U-TCM01 D215111009
AUTOVEI DC2-TCM 2 m D215111009 is a professional diagnostic and programming cable designed for working with transmission control modules (TCM) in trucks, buses, and commercial vehicles.
The product provides a stable connection with the AutoVEI DirectConnect 2U (DC2U) system and Truck Explorer tools, enabling reading, writing, and programming of transmission control units. The cable is used by workshops, ECU service centers, and automotive electronics specialists engaged in professional diagnostics.Thanks to its high-quality construction and signal shielding, the cable guarantees reliable data transmission during operation.
SKU: D215111009 - Accessories adapters cables, AutoVEI – Truck Explorer
Cable AutoVEI DC2-MCM+ACM 2m D195111003
Professional AutoVEI DC2‑MCM+ACM 2 m cable, designed for diagnostics and programming of MCM and ACM modules in commercial vehicles. Ideal for reading and writing ECU memory in Direct Connect mode
SKU: D195111003 - Accessories adapters cables, AutoVEI – Truck Explorer
Cable AutoVEI DC2-OBD2 D165120003
The Autovei DC2-OBD2 cable is designed for Autovei DC2 diagnostic interfaces, such as the DirectConnect 2U. It allows the device to be powered directly from the vehicle’s OBD2 port, without the need for an external power supply.
The cable is designed for professional diagnostics and ECU programming, especially in trucks and commercial vehicles.
SKU: D165120003 - Accessories adapters cables, AutoVEI – Truck Explorer, News
Cable AutoVEI DC2U-CAMU D255142011
The AutoVEI DC2U-CAMU (D255142011) is a specialized service cable designed for working with electronic modules in heavy-duty vehicles. It works with the DirectConnect 2U (DC2U) diagnostic and programming system, enabling advanced service operations.
The product has been designed for workshops specializing in professional diagnostics and ECU programming in bench mode.
The DC2U-CAMU cable allows support for CAMU modules (Iveco Bus), including:
- Reading and writing memory
- Operating in (Boot Mode)
- Diagnostics and controller programming
SKU: D255142011 - Accessories adapters cables, AutoVEI – Truck Explorer
Cable AutoVEI DC2U-EDC17+PTM D235132017
The AUTOVEI DC2U-EDC17+PTM cable is a specialized diagnostic and programming adapter designed to work with the AUTOVEI DirectConnect 2U (DC2U) system. It enables direct communication with EDC17 engine control units (ECU) and PTM modules used in heavy-duty vehicles, providing a stable and secure connection during diagnostics and programming.
SKU: D235132017 - Accessories adapters cables, AutoVEI – Truck Explorer
Cable AutoVEI DC2U-EDC7+PTM+FFR D215132006
The AutoVEI DC2U-EDC7+PTM+FFR cable is a specialized solution designed for direct connection of EDC7, PTM, and FFR controllers in MAN trucks. It allows you to work in Direct Connect (DC) mode.
SKU: D215132006
