No products in the cart.
bench
Showing 1–20 of 50 results
- Accessories adapters cables, Autotuner, Cables
Autotuner Cable ATUBA001 BMW MG1 /MD1 Bench Cable MG1CS003
Accessories adapters cables, Autotuner, CablesAutotuner Cable ATUBA001 BMW MG1 /MD1 Bench Cable MG1CS003
MG1CS003 MG1CS024 MG1CS201 MD1CS001 BMW Bench Autotuner cable for use with AT programmer. It is used to easily connect to the ECU without the risk of bending pins, and saves a lot of time.
Supported ECUs:
Bosch MD1CS001
Bosch MD1CP002
Bosch MD1CP032
Bosch MG1CS003
Bosch MG1CS024
Bosch MG1CS201SKU: ATUBA001 - Accessories adapters cables, Cables bench, MagicMotorSport – Flex
Cable adapter Bench FLEX DENSO FLX2.40
Accessories adapters cables, Cables bench, MagicMotorSport – FlexCable adapter Bench FLEX DENSO FLX2.40
The cable allows connection to DENSO engine control unit.
Main features:
● Bench connection mode
● Ease connection
● A faster connection between ECU and FlexBox
● Reduces the risk of errorSKU: FLX2.40 - Accessories adapters cables, Cables bench, MagicMotorSport – Flex
Cable adapter Bench FLEX TCU for ZF6HP Bosch FLX2.53
Accessories adapters cables, Cables bench, MagicMotorSport – FlexCable adapter Bench FLEX TCU for ZF6HP Bosch FLX2.53
Cable adapter Bench FLEX TCU for ZF6HP Bosch FLX2.53
TCU Connection Cable for ZF6HP Bosch
The FLX2.53 cable allows connection to the control units of the ZF 6HP Bosch automatic transmissions.Main characteristics:
– Bench mode
– higher communication speed
– secure connection
– minimal risk of errorSKU: MS.FLX2.53 - Accessories adapters cables, Cables bench, MagicMotorSport – Flex
Cable adapter Bench FLEX TRW_EMS2.x ECU FLX2.59
Accessories adapters cables, Cables bench, MagicMotorSport – FlexCable adapter Bench FLEX TRW_EMS2.x ECU FLX2.59
The cable allows connection to TRW_EMS2.x engine control unit.
Main features:
● Bench connection mode
● Ease connection
● A faster connection between ECU and FlexBox
● Reduces the risk of errorSKU: FLX2.59 - Accessories adapters cables, Cables, Cars/LCV, DFB Technology – DFOX
Cable DFOX BMW ZF8HP TCU Bench 2m
Accessories adapters cables, Cables, Cars/LCV, DFB Technology – DFOXCable DFOX BMW ZF8HP TCU Bench 2m
BMW ZF8HP TCU Bench Cable
Type 1, 2 and 3 supported with 1 cable
Bench cable for ZF8HP, for reading/writing Auto gearbox TCU/flash
Allows easy connections between a tool and BMW ZF8HP TCUsSKU: ZF8HP.TCU - Accessories adapters cables, Cables, DFB Technology – DFOX, OHW / AGV
Cable DFOX EDC17CV52 Bench
EDC17CV52 Bench Cable Harness
for use with a flasher tool. Used to easily connect directly to ECUs without the risk of bending pins, eliminates pinout issues, and also saves a lot of time.SKU: EDC17CV52.DFOX - Accessories adapters cables, Cables, DFB Technology – DFOX, Truck / CV
Cable DFOX TRW2.x bench mode
Allows operation in service mode through the controller connector.
TRW2.x Bench Mode cable
For controllers:– TRW EMS2.2 Gen2,
– TRW EMS2 E5,
– TRW EMS2.3,
– TRW EMS2.4.
Compatible exclusive with:
DFOX / FoxFlash
SKU: MS.TRW2.x.DFOX - Accessories adapters cables, Cables, DFB Technology – DFOX, OHW / AGV
Cable KESS3 EDC17CV52 Bench
EDC17CV52 Bench Cable Harnessfor use with a flasher tool. Used to easily connect directly to ECUs without the risk of bending pins, eliminates pinout issues, and also saves a lot of time.
SKU: EDC17CV52.KESS3 - Accessories adapters cables, Cables, Dimsport, New Trasdata
Cable New Trasdata EDC17CV52 Bench
EDC17CV52 ECU Bench Cable Harness
for use with a flasher tool. Used to easily connect directly to ECUs without the risk of bending pins, eliminates pinout issues, and also saves a lot of time.Length: 1.5m
SKU: MS.EDC17CV52.TRASDATA - Dash, Diagnostic tools, News, OBD Star, Programmers
DC706 – ECU/TCU/BODY Read/Write/Clone – FULL Version!
Dash, Diagnostic tools, News, OBD Star, ProgrammersDC706 – ECU/TCU/BODY Read/Write/Clone – FULL Version!
OBDStar DC706 is an advanced diagnostic tool that enables cloning, reading, and writing ECU, TCU, and Body module memory in passenger cars and motorcycles. It supports a wide range of manufacturers, including brands like BMW, Ford, Audi, VW, FCA, Nissan, and many others. With features such as controller cloning, IMMO PIN code reading, odometer calibration, and ECU programming, the OBDStar DC706 is an indispensable device for professional workshops and specialists in automotive diagnostics.
Features:
- Reading and writing ECU, TCU, and Body module memory
- ECU and TCU controller cloning
- Supports many vehicle brands (including BMW, Audi, VW, Nissan, Ford)
- ECU programming and odometer calibration
- IMMO PIN code reading
- Support for over 490 types of ECM and 180 types of TCM
SKU: MSG.DC706.OS - Chiptuning, Hexprog, News, Programmers
Hexprog II Chip Tuning Tool Full Set
Hexprog II is the cutting-edge, latest-generation chip tuning tool. With Hexprog II, you gain the power to repair, clone, and chip tune Ecus/Tcus across diverse vehicles.
The Full Set provides a comprehensive MASTER LICENSE with full access to all Hexprog II capabilities, including OBD, Boot, and Bench methods.
This versatile solution covers cars, trucks, bikes, and boats, having ability to access Ecus/Tcus On bench, Boot mode, JTAG, and OBD maximizing your vehicle’s performance potential.
The price of an annual subscription is 350 usd net.
SKU: HP0005 - Alientech, Chiptuning, Programmers
KESS3 Master BIKE OBD + BIKE BOOT/BENCH
A new product from Alientech- One device with a choice of protocols tailored to specific vehicle groups and reading methods – OBD/ Bench&Boot
If you have a previous KESSv2 or K-TAG device please contact us. For existing Alientech users, there is an exchange program that allows you to receive a discount of up to 95%
New device -> lower annual subscriptions. From now on, the cost of annual subscription for Master version is 1190 EUR net regardless of the number of protocols. For Slave version it is 590 EUR net.
SKU: MS.KESS3.MAS.B - X-Tool
KESS3 Master Car/LCV OBD + Boot/Bench
A new product from Alientech- One device with a choice of protocols tailored to specific vehicle groups and reading methods – OBD/ Bench&Boot
If you have a previous KESSv2 or K-TAG device please contact us. For existing Alientech users, there is an exchange program that allows you to receive a discount of up to 95%
New device -> lower annual subscriptions. From now on, the cost of annual subscription for Master version is 1190 EUR net regardless of the number of protocols. For Slave version it is 590 EUR net.
SKU: MS.KESS3.MAS.CAR.LCV
