ABRITES Vehicle Diagnostics Interface (AVDI) is the latest version of the interface, enabling software for extensive car maintenance, including diagnostics. AVDI is the foundation on which the entire ecosystem of products from ABRITES is based. The base version of the interface will provide you with access to a wide range of capabilities, allowing you to enter the world of car diagnostics at little cost. By extending the device with additional special functions, you will be able to benefit from capabilities that are often not offered by vehicle manufacturers in OEM tools.
When purchasing the interface, the customer receives a one-year subscription to AMS and a Support Plan Service (SPS) for the price. AMS enables you to receive the latest AVDI software updates, while SPS guarantees fast and efficient technical support from a team of experienced professionals. In addition, you will have the ability to perform basic diagnostics on all supported brands: Audi, Volkswagen, Seat, Skoda, Bentley, Lamborghini, BMW, MINI, Rolls Royce, Renault, Dacia, Mercedes-Benz, SMART, Mitsubishi, GM, Peugeot, Citroen, Opel/Vauxhall, Porsche, Honda, Ford, Mazda, Jaguar, Land Rover, Toyota, Lexus, Volvo, FIAT, Alfa Romeo, Lancia, Jeep, Subaru, Nissan, Infiniti, Chrysler, Dodge, Kia, Hyundai, Suzuki, Daihatsu, DAF, Aprilia, BMW, Bombardier and others.
The basic diagnostics that can be carried out for all the brands listed above include:
– full vehicle scan,
– module identification – view all modules in the vehicle, including VIN and part numbers (if applicable),
– read and delete errors (DTC),
– live data display – view live data from vehicle sensors in real time.
What’s more, all AVDI owners are given the option of using PassThru, which is an invaluable tool for working with original equipment manufacturer (OEM) software for autos and other vehicles. The J2534 PassThru driver is compliant with international SAE standards and emulates various interfaces to access third-party software. This means that you can access and work with OEM products via AVDI, without the need for additional tools. This saves time and expense and keeps you and your customers happy.
PassThru compatibility:
– BMW, MINI:
BMW – DIS via K-line and CAN bus,
BMW – E-Sys, INPA, EDIABAS, NCS Expert, NFS via K-line and CAN bus,
BMW Rheingold ISTA-P,
– Mercedes:
Bombardier diagnostic software,
Mercedes DAS/Xentry – Star Diagnosis,
– FCA:
Evinrude Diagnostics,
Fiat EXAMINER,
– Ford:
Ford Scanner,
– GM:
GM – Tech2Win, GDS2 and SPS diagnostic software,
– Honda:
Honda/Acura HDS,
– Hyundai/Kia:
Hyundai/KIA GDS
– Jaguar/Land Rover:
Jaguar Land Rover Symptom Driven Diagnostics (JLR SDD),
Land Rover/Jaguar IDS
– Nissan:
Nissan Consult III+,
– Mitsubishi:
Mitsubishi MUT3,
– Subaru:
Subaru Select Monitor III,
– Suzuki/Yamaha:
Suzuki/Yamaha Marine Diagnostics,
– Toyota/Lexus/Scion:
Toyota/Lexus/Scion Techstream,
– Volvo:
Volvo VIDA,
– VW/Audi/Seat/Skoda/Bentley/Lamborghini:
VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS
– others:
Webasto TT,
VCI emulator.
VAG
Full vehicle scan
Reading and deleting DTCs
Display of live values from vehicle modules
Test of an input/output actuator
Activation and deactivation of actuators
Calibrations (e.g. calibration of steering angle)
Scanning of all units or selected ones, access to scan reports in printable format
Diagnostic channel adaptations
Programming of keys by channel, if PIN is known
Guided functions for ECU, instrument cluster, navigation, steering wheel, electronic parking brake, telephone, comfort module and body control module
Enable video on the move for MMI 2G and 3G
Steering wheel lock adaptation
Conversion of a 7-digit to a 4-digit PIN code
DPF removal via DUMP – EDC16 (checksum required), EDC17
Key programming, mileage calibration and module replacement for VAG Immo III and III+ vehicles
BMW
Reading and deleting DTCs
Full guidance during DTCs procedures
Real-time data monitoring from multiple modules simultaneously
Actuator testing for all modules
Generate/save a complete vehicle order
Programming of key if security data (ISN) required (ZN003 PROTAG V2 required)
Programming of EWS1/EWS2 keys via EWS dump with ZN003 PROTAG V2
Programming of EWS3 key with ZN055 ABPROG EWS3 adapter and ABPROG software
Programming of the CAS1/CAS2/CAS3/CAS3+/BDC keys completely via OBDII (ZN003 PROTAG V2 required)
Switch off transport mode
Change ISN DME/DDE number
Guided functions:
– Entering and exiting transport mode
– Resetting the service interval
– DPF replacement
– DPF regeneration
– Reset FRM short circuit
– Smooth DME/DDE configuration
– Reset of EGS adaptation for ZF 8HP and 6HP
– Activate parking brake workshop mode
– Injector calibration
– Start-up torque adjustment
Renault/Dacia
Reading and deleting DTCs
Display of actual values (numerically or graphically)
Actuator testing – ALL actuators can be tested separately
Advanced – view and edit various configuration parameters
Scan report
Key programming for all vehicles up to 2014 (including Clio IV)
Key programming for SMART 453/ Renault Twingo III
Module adaptation by changing VIN
Change radio code
Scan report
Advanced diagnostics – up to x95 (off line); up to Clio5 (on-line)
– Coding at factory level
– Language change
– many more
Mercedes-Benz,Maybach, Smart
Reading and deleting DTCs
Live value monitoring
Actuator test
SCN coding (e.g. DPF regeneration)
Reset of service intervals for both Assyst and Assyst Plus for most current models
Vehicle identification
Module scan
Customised session
Smart
– SOFTOUCH activation – switching from semi-automatic to automatic transmission
– Key programming – models 450, 451, 452, 454
– Key programming for SMART 453/ Renault Twingo III
– Emergency start – models 451, 454
– Mileage calibration – both SAM module and instrument cluster
– Gearbox adaptation
– Activation of cruise control
– Reflashing and renewal of the SAM module and SAM/ECM synchronisation
Mercedes-Benz
– Mercedes-Benz eVito speed limit calibration
– Programming of keys by drop (DAS 2/2a/2b/ DAS 3)
– Calibration and cluster adaptation for vehicles up to 2014
– SCN coding completely via OBDII (no online Xentry account required)
– CPC modifications via OBDII:
Removal of the VMAX limiter
Adjustment of exhaust flaps
Torque limiter adjustment
– Reset the SBC counter
– Switch on video in motion
– Bosch/Temic/TRW airbag failure data cleaning up to 2010
Mercedes Truck Range
Module scanning
Module identification
Reading and deleting DTCs
Real-time data monitoring
Mitsubishi
Reading identification data
Reading and deleting DTCs (description of DTCs is available in many languages)
Scanning for available control units
Coding and adaptation
Display of actual values
Reading and programming ECU flash
The following functionalities are also available in the online version of the software:
Full module identification
Connection to electronic modules
Reading the EDC15 engine control unit (ECU)
PSA
Reading and deleting DTCs
Live value monitoring of all electronic modules and sensors via graph and table views
Actuator test
Identification of modules
Change of identifier in BSI, telematics, airbag, MDS
Fault data cleaning in some airbag modules via DUMP (offline)
Change of VIN in BSI (does not include BSI Continental 2015+ and Delphi 2016+), Telematic/Radio, Airbag
Change of PIN in BSI and setting of BSI as virgin state (current PIN must be known)
Key programming for all models if PIN is known
Change of mode (customer/saloon) BSI 2015+
BSI backup/restore of entire configuration
BSI overview/cleaning of fault log (via ABRITES diagnostics for offline PSA) and history logs
BSI service reset (via ABRITES diagnostics for PSA offline)
Set PIN ELV in BSI (via ABRITES diagnostics for PSA offline)
Verify/set PIN in Hands Free module in BSI (via ABRITES Diagnostics for PSA offline)
Emergency start if PIN is known for vehicles with a mechanical key (via ABRITES Diagnostics for PSA offline)
Porsche
Module identification
DTC fault reading/clearing
Real-time data display
Actuator test
Programming of keys for Porsche models after 2010. – Spare key and situation of all lost keys (ZN003 PROTAG V2 required)
Coding options
Adaptive channels
Honda
Module scan – fault information DTCs, Live Data (if available) and extended module identification
Vehicle identification – automatic vehicle model detection
Reading and deletion of DTCs – shown on each module
Key programming for all vehicles up to 2022
Toyota, Lexus, Scion
Module identification
Scanning for diagnostic trouble codes (DTC)
Deletion of DTCs
Live data monitoring
Actuator tests
Coding functions
Special functions of the electronic module
Key programming for all vehicles manufactured up to 2018 (type G keys (mechanical and smart keys) and type H keys (smart keys only)
Identification and cloning of the key
Resetting and subsequent reuse of smart keys (ZN003 PROTAG V2 also required)
Volvo
Reading identification data from all electronic control units
Reading and deleting DTCs
Display of actual values/real-time data
Service functions:
– Service reset
– Cylinder adaptation reset
– No speed limit
– Mode change (normal, factory, transport, safety)
– And much more
Chrysler, Dodge, Jeep
Reading and deleting DTCs
Module detection
Module identification
Extended identification
Real-time data monitoring
Actuator test
Flash data read/write and Flash program for ECUs EDC15C2 and EDC16CP31
Kia/Hyundai
Full vehicle scan
Module identification
Reading and deleting of DTCs – with detailed information on codes
Real-time data display
Actuator testo
Read PIN code from EDC15 and Kefico ECUs via dump
Instrument cluster calibration for instrument clusters with 93c56 EEPROM (2004-2008) – Accent, Vera Cruz, H1….
PIN code reading from a working key for all vehicles with mechanical keys and DST AES, DST 80 or HITAG 2 transponders
PIN code reading for vehicles with ECU with built-in immobiliser brands: Kefico, Bosch EDC15/EDC16/EDC17, Delphi.
PIN by VIN calculator for ALL vehicles up to production year 09.2007
Recording of transmitter codes for ALL vehicles with mechanical keys
Ford
Reading and deleting DTCs
Module identification
Extended module identification
Resetting service interval
Actuator test
Airbag – fault data clearing and renewal – RCM module with the following processor: XC23xx data flash for FORD/Mazda/JLR and Volvo, as well as TMS470 + EEPROM 25320/25640 for Ford/JLR
Fiat, Chrysler Automobiles
Key programming
Reading in/programming of the BCM module
Possibility of key programming by reading from the BCM using the ABRITES ProTag Programmer.
- Supported models included in the AVDI basic diagnostic software:
Fiat: Stilo, Punto, Palio, Idea, 500, 500L, 500X (key on hardtop), Doblo, Qubo, Fiorino, Ducato (until 2019), Panda
Alfa Romeo: 147, GT, MiTo, Giulietta, 159, Brera
Jeep: Compass, Grand Cherokee, Wrangler (until 2019)
Dodge: Challenger, Charger, Viper, RAM (until 2019),
Ferrari: 612, FF, 599, F12, 458, California (key on hardtop)
Jaguar i Land Rover
Module scan
Reading and deleting DTCs for all modules,
Service functions
Key programming
Remote control and keyless programming
Mileage calibration for models up to 2014
General Motors (GM)
Module reading and identification
Reading/deleting DTCs
Data display
Programming of security code and vehicle identification number (VIN).
Suzuki
Module identification
Reading and deleting DTCs
Real-time data monitoring
Actuator test
Subaru
Unit search
Module identification
Reading and deleting DTCs
Display of temporary DTCs
Display of stored DTCs
Display of real-time data
Deletion of fault data
Tesla
Scanning the vehicle for all available electronic modules
Reading and deleting DTCs
Real-time data monitoring
Service functions:
– Activation of the parking brake in service mode
– IBST VIN programming and reset
– Pedal shift test
– Dimming of the centre, left or right mirror
– Headlamp communication test
– HOMELINK communication test
– Calibration of windows in all doors
– NFC amplitude reading and much more
J1939 compliant cars
Module scanning
Reading of DTCs in each module
Deletion of DTCs
Real-time value monitoring
Freeze frame
In addition to all the free features, there are many options that can be purchased separately, giving access to a wide range of possibilities for any professional. These functionalities are available as special software features available in our online shop and include:
– Key programming – add a spare key or program keys in situations where all keys have been lost
– Module replacement – perform part exchange, module replacement or module adaptation
– PIN code reading – obtain the information required for key programming and module adaptation
– Read component security bytes – read bytes for module adaptation and key programming
– Clock calibration – access clock data
– Programming of the engine control unit (ECU) – update software to apply custom settings