Leak tester AutoXScan SD930PRO smoke generator
Professional automatic leak tester for pipes, hoses, joints and installations AutoXScan SD930PRO detects leaks using a smoke generator. The device will help you locate leaks in piping systems quickly and accurately within minutes. The equipment comes from the authorized Polish distribution of AutoXScan.
Application of the device
The smoke generator can be used to test the tightness of various systems in a car. You can conduct, for example:
- intake system test,
- turbocharger test,
- exhaust system test,
- cooling system test,
- car seal test,
- fuel tank system test,
- test of various pipe fittings.
Mode of action
- You pour 20 ml into the leak detector, e.g. baby olives.
- You open the hood and hang the detector in the hood.
- You disconnect the tube that is to be connected to the detector.
- You connect the detector to the DC12V battery.
- You turn on the power switch.
- After 30 seconds, the pipe will fill with smoke.
- You check leak points.
Temperature protection
The detector has a temperature protection – if it exceeds the operating limit, e.g. above 75 ° C, it will automatically turn off the power. In this case, please stop work and return after the device has cooled down.
Important for the first use!
When using the device for the first time, pour in 10 to 20 ml of oil, taking care not to exceed this range! Before filling, remove the remaining oil from the detector and then start filling a new one with 10ml to 20ml. Only refill the tank when the smoke becomes thin or absent.
DO NOT use the detector for 8 minutes continuously – interval breaks are necessary for undisturbed operation.
Kit contents
- AutoXScan SD930PRO leak tester
- Power cable
- Long smoke hose
- Hook with a clamping nut
- Tips
- Standard cone adapter
- Universal adapter – air pump
- Valve core key
- Special EVAP connector
- Oil bottle
- Hard rubber hose plug
- Paper instruction in English
- Original packaging
Also in our offer:
AUTOOL SDT208 Generator Dymu
AUTOOL SDT203 Generator Dymu