No products in the cart.
Tuning ECU
Showing all 10 results
- News, Subscriptions
AutoTuner Slave Tool Transfer to a New Master
Slave Tool Transfer is a service that allows an AutoTuner Slave device to be transferred from its current Master account to a new Master.
Important: Before purchasing, please contact us and provide the serial numbers of the current Master device, the new Master device, and the Slave device. The current Master must first perform the “Slave Tool Release” operation. After verification, we will confirm whether the transfer can be performed and provide further instructions regarding the purchase process.
SKU: at-slave-transfer - News, Subscriptions
AutoTuner Upgrade slave to master
Upgrading an AutoTuner device from Slave to Master is a service that changes the device license and expands its capabilities when working with ECU files.
Important: Before purchasing, please contact us and provide the device serial number. The current Master must first perform the “Slave Tool Release” operation. After verification, we will confirm whether the upgrade can be performed and provide further instructions regarding the purchase process.
SKU: at-slave-upgrade - Accessories adapters cables, Magicmotorsport - Flex, BDM / Boot
BootROM Cable Kit for Cummins Units + Case FLX01.003
Accessories adapters cables, Magicmotorsport - Flex, BDM / BootBootROM Cable Kit for Cummins Units + Case FLX01.003
The Magicmotorsport Flex BootROM Cable Kit for Cummins CM2100–CM2450 is a professional cable set designed for working with Cummins ECU control units in Bench and BootROM mode. The kit is intended for tuners, electronic workshops, and service centers for heavy-duty vehicles and machinery.
SKU: FLX01.003 - Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for Toyota Denso Gen3 ATUBA006
The professional ATUBA006 cable is designed for Toyota Denso Gen3 ECUs, providing a safe and stable connection between the ECU and a programming device in bench mode.
This cable is engineered for tuning workshops, ECU service centers, and specialists involved in reading and writing engine control unit software.
It ensures a stable connection between the ECU and the AutoTuner interface, eliminating the risk of pin damage or electrical system issues.SKU: ATUBA006 - Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for VAG MD1CS004 ATUBA008
The specialist Bench Cable ATUBA008 is designed for use with Bosch MD1CS004 ECU units installed in VAG group vehicles (VW, Audi, Škoda, Seat). It allows for direct and safe connection of the ECU to diagnostic and programming tools in Bench mode, providing full access to the ECU memory and enabling advanced operations such as reading, writing, and modifying engine control maps.
Advantages:
- Full ECU access: Supports reading and writing of FLASH and EEPROM memory.
- Safe connection: Eliminates the risk of damaging ECU pins thanks to a stable bench connection.
- Professional use: Ideal for tuning workshops and service centers that work with ECU programming.
- Easy to use: Plug & Play with compatible programming tools that support Bench mode.
SKU: ATUBA008 - Accessories adapters cables, Autotuner, Cables
Cable Autotuner Bench for VAG MG1CS001 – MG1CS111 ATUBA009
Accessories adapters cables, Autotuner, CablesCable Autotuner Bench for VAG MG1CS001 – MG1CS111 ATUBA009
Original AutoTuner Bench cable (ATUBA009) designed for direct connection to Bosch MG1CS001 and MG1CS111 engine control units used in VAG group vehicles (VW, Audi, Skoda, Seat).
It enables safe and stable operation in BENCH mode, without the need for communication via the OBD connector.SKU: ATUBA009 - Accessories adapters cables, AutoVEI – Truck Explorer
Cable AutoVEI DC2U-EDC17+PTM D235132017
The AUTOVEI DC2U-EDC17+PTM cable is a specialized diagnostic and programming adapter designed to work with the AUTOVEI DirectConnect 2U (DC2U) system. It enables direct communication with EDC17 engine control units (ECU) and PTM modules used in heavy-duty vehicles, providing a stable and secure connection during diagnostics and programming.
SKU: D235132017 - Accessories adapters cables, Universal
Cable Bench Isuzu Transtron M3SC
The Bench Isuzu Transtron M3SC diagnostic cable is designed for reading and writing the memory of the ECU engine controller in vehicles with the Transtron M3SC system. It allows you to work with the ECU without having to remove it, which is particularly useful in workshops dealing with electronic diagnostics.
SKU: MS.COBD.Transtron.M3 - Accessories adapters cables, Universal
Cable Bench Isuzu Transtron M5/M5S
The Bench cable for Isuzu Transtron M5/M5S (ECU) controllers enables convenient and safe programming and diagnostics.
Thanks to the built-in ignition switch and 120Ω CAN resistor, the cable allows for full simulation of operating conditions in the car.SKU: MS.COBD.Transtron.M5 - Accessories adapters cables, DFB Technology – DFOX, Cables, Cars/LCV
Cable DFOX Bench MD1CS006
Professional MD1CS006 Renault Bench Cable is an indispensable tool for tuners and workshops involved in engine control unit (ECU) programming and diagnostics. Designed specifically for MD1CS006 and MD1CS016 ECUs, used in 1.5L Blue dCi K9K-872 engines, it ensures a fast, safe, and stable connection to the control unit.
High-quality replacement.
SKU: MS.MD1CS006
