The VVDI 2 programmer is a diagnostic device with the following functions:
VAG group support (diagnostics, special functions – immo 1, immo 2, immo 3, 4 and immo 5, CS, PIN, MAC, EDC17 / MED17 editor, BCM2 editor, PG35 lock adaptation, smart key programming, all Audi lost keys A6 / A7 / A8 / Tuareg-immo5). Guided functions – sensor adaptation, coding, TV-free, Key programming after OBD-BCM2, EZS (Audi a6 / q7).
BMW service (CAS repair after unsuccessful flashing, key handling including CAS 4 on XEP100 – also for OBD, module coding, unlocking keys based on a CAS file, reading ISN, transferring keys between CASs, editing), Adding keys in BMW on FEM and BDC (from 24/08/2017), blocking and removing keys in FEM / BDC
Porsche support (Panamera, Macan, Cayenne key programming, keyless and no keyless)
PSA group support (PIN reading and key programming at the moment)
The VVDI 2 programmer also allows you to program transponders of most brands from a file (preparation, unlocking, copying transponders), including BMW CAS3 , Mercedes Atego, RangeRover on PIC
Passthru support
Built-in antenna for programming transponders with places for small carbon and glass.
Remote control frequency tester built into the device (measurement reading directly on the LCD display)
The programmer is additionally equipped with a neat case for storing the device with cables
No subscription fees
Very frequent updates
The functions described above do not exhaust the capabilities of the device. This is just an outline of the possibilities.
What do the different versions contain?
Basic version:
Transponders from a file
Transponder tools (read / write / edit)
Passthru
PSA PIN reading and key programming
Programming Xhorse universal remotes
Cloning of remotes
VAG IMMO 4:
Everything in the Basic version
Immo 4 (the license covers all functions used in immo4, i.e. keys / meters / adaptations etc.)
OBD 2 diagnostics, guided functions, adaptations, basic settings, programming of .sgo .frf controllers etc.
VAG IMMO 4 IMMO 5:
Everything as in the VAG IMMO 4 version
Immo 5 (the license covers all functions used in immo 5, e.g. BCM 2, MQB meters, edc17 …
Programming keys in Porsche cars
VAG FULL:
Everything in IMMO 4 and IMMO 5
ID 48 VAG transponder copy license (Data collector required)
Transponder copying license ID 48 96 bit – allows access to the MQB platform (key programming)
BMW OBD:
BMW OBD (the license includes keys, mileage, coding, repair, including CAS3 , ISN reading from a large number of driver models)
BMW OBD CAS 4, CAS 4 :
Everything as in the BMW OBD version
BMW CAS 4, 4 (key programming, edition) – CAS 4 and 4 on XEP100 OBD support !!!
BMW OBD FEM/BDC:
Everything as in the BMW OBD version
BMW FEM / BDC (key programming, editing, coding, replacement)
BMW FULL:
Everything in the BMW OBD, CAS 4, CAS 4 and FEM / BDC versions
FULL version:
VAG IMMO 4
VAG IMMO 5
COPY 48 VAG (data collector required)
ID48 96 bit transponder copy (including MQB key license)
BMW OBD
BMW CAS 4, CAS 4 (also via OBD)
BMW FEM/BDC
Below is a video showing the reading procedure using the VVDI 2 programmer:
The VVDI 2 programmer is licensed for each brand. Before buying, please make sure which license you want to buy.