No products in the cart.
KESS3
Showing 1–20 of 39 results
- Picoscope
AlienTech KESS3 Unlock Module – Complete Kit KESS3UM000
Unlock Module – Complete Kit is a complete kit manufactured by Alientech, designed for Boot mode connection to Bosch MD1 and MG1 engine control units (ECUs). The kit enables communication with the ECU and allows the unlock and programming operations supported by the KESS3 tool to be performed.
The product is available for pre-order. Orders can be placed now. Shipping will begin on 15th October 2026.
SKU: KESS3UM000 - Accessories adapters cables, Alientech, Cables
Bench Cable KESS3 DQ380/DQ381/DQ500 DSG TCU VAG
The KESS3 Bench Cable DQ380/DQ381/DQ500 DSG TCU VAG is designed for direct connection to DQ380, DQ381, and DQ500 DSG transmission control units used in VAG vehicles. It enables convenient reading, writing, and diagnostics of the TCU on the workbench using the KESS3 programmer.
The cable provides a fast and stable connection between the programmer and the transmission control unit without the need to work through the vehicle’s diagnostic connector.
SKU: COBD.KESS3.DQ380 - Accessories adapters cables, Alientech, Cables, Cars/LCV
Bench Cable KESS3 VAG DQ200 DSG TCU
KESS3 Bench Cable is a specialized cable designed for working with DQ200 / DSG7 transmission control units (TCUs) used in selected vehicles of the VAG group. It enables a direct and stable connection between the KESS3 programmer and the TCU, providing convenient operation in Bench mode. The cable is designed for supported operations such as identification, reading, writing, recovery, and ECU repair.
SKU: COBD.KESS3.DQ200 - Accessories adapters cables, Alientech, Cables
Cable adapter KESS3 Bench for ECU connection – 144300KBNC
Accessories adapters cables, Alientech, CablesCable adapter KESS3 Bench for ECU connection – 144300KBNC
Cable adapter KESS3 Bench for ECU connection – 144300KBNC
Multicore cable designed for BENCH mode operation with the KESS3 device. Allows direct connection to the ECU on the workbench, without using the OBD port. Used for reading and writing data from engine control units (ECUs).
SKU: 144300KBNC - Accessories adapters cables, Alientech, Cables
Cable Alientech KESS3 Harley-Davidson CANbus 6-pin – 144300K257
Accessories adapters cables, Alientech, CablesCable Alientech KESS3 Harley-Davidson CANbus 6-pin – 144300K257
Alientech KESS3 Harley-Davidson CANbus 6-pin 144300K257 is a cable designed for use with the KESS3 device and Harley-Davidson motorcycles equipped with a 6-pin CANbus connector. It provides the correct connection between the tool and the vehicle during ECU service work.
SKU: 144300K257 - Accessories adapters cables, Alientech, Cables, Cars/LCV
KESS3 Bench Cable for ZF 8HP
The KESS3 Bench Cable for ZF 8HP is designed for direct connection between the tuning tool and ZF 8HP transmission control units, as well as selected AL-series controllers. It enables Bench mode operations, including reading, writing, repairing, and cloning supported TCU units.
SKU: ZF8HP.TCU.KESS3 - Accessories adapters cables, Alientech, Cables
KESS3 Bosch MD1CC878 Isuzu Bench Cable
KESS3 Bosch MD1CC878 Isuzu Bench Cable designed for direct connection to Bosch MD1CC878 ECUs used in Isuzu vehicles. It allows convenient and safe ECU reading and writing on the bench using the KESS3 programmer.
The cable helps reduce the risk of incorrect connection and speeds up ECU Bench mode operations.
SKU: MD1CC878.KESS - Accessories adapters cables, Alientech, Cables
KESS3 DL382 DSG TCU VAG Bench Cable
KESS3 DL382 DSG TCU VAG Bench Cable designed for direct connection to DL382 DSG transmission control units used in VW / Audi Group vehicles. It allows convenient TCU reading and writing on the bench using the KESS3 programmer.
The cable provides a quick and stable connection between the programmer and the TCU without working through the vehicle diagnostic socket.
SKU: COBD.KESS3.DL382 - Alientech, Chiptuning, Programmers, Promotions
KESS3 Master Agri Truck Buses OBD
A new product from Alientech- One device with a choice of protocols tailored to specific vehicle groups and reading methods – OBD/ Bench&Boot
If you have a previous KESSv2 or K-TAG device please contact us. For existing Alientech users, there is an exchange program that allows you to receive a discount of up to 95%
New device -> lower annual subscriptions. From now on, the cost of annual subscription for Master version is 1190 EUR net regardless of the number of protocols. For Slave version it is 590 EUR net.
SKU: MS.KESS3.M.AGRI.TRUCK.B - Programmers, Chiptuning, Alientech
KESS3 Master BIKE OBD + BIKE BOOT/BENCH
A new product from Alientech- One device with a choice of protocols tailored to specific vehicle groups and reading methods – OBD/ Bench&Boot
If you have a previous KESSv2 or K-TAG device please contact us. For existing Alientech users, there is an exchange program that allows you to receive a discount of up to 95%
New device -> lower annual subscriptions. From now on, the cost of annual subscription for Master version is 1190 EUR net regardless of the number of protocols. For Slave version it is 590 EUR net.
SKU: MS.KESS3.MAS.B
