ThinkCar 1008C – 8-Channel Automotive Oscilloscope

ThinkCar 1008C – 8-Channel Automotive Oscilloscope

The ThinkCar 1008C is a professional 8-channel automotive oscilloscope designed for diagnosing vehicle electrical and electronic systems. It enables simultaneous measurement and analysis of signals from multiple components, making it easier to detect faults in ignition systems, sensors and vehicle electrical circuits. The oscilloscope works with Windows computers via a USB 2.0 connection, which provides both communication and power. It features 8 measurement channels, a sampling rate of 2.4 MSa/s and 12-bit resolution. The device also includes a built-in signal generator and software with over 80 diagnostic functions designed for automotive applications.

Diagnostic Capabilities

Key features include:

• 8-channel signal measurement – simultaneously monitor and compare electrical waveforms from multiple measurement points.
• Ignition system diagnostics – analyze signals related to the operation of the ignition system.
• Sensor diagnostics – check signals from the crankshaft position sensor, camshaft position sensor, mass airflow sensor and throttle position sensor.
• Oxygen sensor testing – analyze signals generated by oxygen (lambda) sensors.
• CAN and LIN bus analysis – monitor communication signal waveforms used in vehicles.
• Charging system diagnostics – check signals related to alternator operation and the vehicle’s electrical system.
• Starter testing – analyze voltage changes during engine starting.
• Measurement data recording – record waveforms for later analysis.

Signal Generator

The ThinkCar 1008C features a built-in signal generator that can simulate electrical waveforms, including crankshaft and camshaft position sensor signals. This allows technicians to perform additional diagnostic tests and check how selected systems respond to generated signals.
Signal generator specifications:

• Number of channels: 8
• Frequency range: 0–250 kHz
• Signal level: LVTTL
• Applications: Sensor signal simulation and electronic system testing

Measurement Functions and Waveform Analysis

The oscilloscope software provides tools for detailed analysis of recorded electrical signals.
Available functions include:

• Voltage measurements – including Vpp, Vrms, Vmax and Vmin.
• Time measurements – frequency, period and duty cycle.
• FFT analysis – frequency spectrum analysis of electrical signals.
• Mathematical functions – waveform addition, subtraction, multiplication and division.
• Measurement cursors – precise measurement of voltage values and time intervals.
• Auto mode – automatic adjustment of measurement settings.

PC Compatibility

The ThinkCar 1008C works with computers running Windows. It connects via a USB 2.0 cable, which also powers the oscilloscope, eliminating the need for a separate power adapter. The included software allows users to display electrical waveforms, perform measurements and save diagnostic results. The manufacturer also specifies support for LabVIEW.

Technical Specifications

• Manufacturer / Brand: ThinkCar
• Model: 1008C
• Number of channels: 8
• Bandwidth: 100 kHz
• Sampling rate: 2.4 MSa/s
• Resolution: 12-bit
• Acquisition memory: 4K
• Maximum input voltage: 400 V
• Input resistance: 1 MΩ
• Input sensitivity: 10 mV/div – 5 V/div
• Time base: 1 ns/div – 20,000 s/div
• Time base accuracy: ±50 ppm
• Interface: USB 2.0
• Power supply: USB
• Dimensions: 190 × 167 × 35 mm
• Weight: 630 g

Package Contents

• 1008C oscilloscope
• 8 BNC test cables with alligator clips
• Hantek HT25 probe
• USB cable
• PC software
• User manual
• Carrying case

Also Available in Our Store:

• ThinkCar Scope Box – 4-Channel Oscilloscope
• ThinkCar PROG 2

The ThinkCar 1008C is an oscilloscope designed for use with a PC. A computer running Windows and the appropriate software are required to operate the device. No separate power adapter is needed, as the oscilloscope is powered via USB.