Diagnostyka Samochodowa
Showing 1–20 of 38 results
- Autel, Car / LCV, Diagnostic tools, News
Autel MaxiBAS BT608 – Battery Tester
Autel MaxiBAS BT608 is a professional battery tester designed for diagnosing vehicle batteries, starting systems and charging systems. The device uses Adaptive Conductance technology to assess battery health, starting performance and reserve capacity. This allows technicians to quickly evaluate battery condition and identify potential issues. The tester features a 5.5-inch touchscreen, built-in thermal printer and wireless VCI diagnostic interface. In addition to battery testing, it supports battery registration, starting and charging system diagnostics, and reading and clearing diagnostic trouble codes in supported vehicle systems.
SKU: MS.Autel.BT608 - Autel, Car / LCV, Diagnostic tools, News
Autel MaxiBAS BT609 – Battery Tester with Vehicle Diagnostics
Autel, Car / LCV, Diagnostic tools, NewsAutel MaxiBAS BT609 – Battery Tester with Vehicle Diagnostics
The Autel MaxiBAS BT609 is an advanced diagnostic tool designed for testing batteries, starting and charging systems, and vehicle electronic systems. It combines the capabilities of a professional battery tester with Autel’s vehicle diagnostic functions, allowing technicians to assess the condition of the vehicle’s electrical system and perform selected service procedures. The device uses Adaptive Conductance technology to provide a more accurate assessment of battery health, cold cranking performance and reserve capacity. The tester features a 7-inch touchscreen, Android 9.0 operating system and a wireless VCI diagnostic interface. With AutoVIN and VINScan, users can quickly identify vehicles and access information useful for battery selection and diagnostics.
SKU: MS.Autel.BT609 - Autel, Car / LCV, Diagnostic tools, Electronic equipment, News, Oscilloscopes
Autel MaxiScope MP608 – 4-Channel Oscilloscope
Autel, Car / LCV, Diagnostic tools, Electronic equipment, News, OscilloscopesAutel MaxiScope MP608 – 4-Channel Oscilloscope
Autel MaxiScope MP608 is a professional 4-channel oscilloscope designed for diagnosing vehicle electrical and electronic systems. The device allows simultaneous measurement and analysis of four electrical signals, making it easier to identify faults in sensors, actuators and communication between control units. The oscilloscope offers 12-bit resolution, 20 MHz bandwidth and a sampling rate of up to 80 MS/s. It works with compatible Autel MaxiSys diagnostic tablets and Windows computers, providing advanced capabilities for detailed electrical waveform analysis.
SKU: MS.Autel.MP608 - Subscriptions
Autel SGW Unlock License – EU PACK – 1 Year
The Autel SGW EU PACK license provides access to protected diagnostic functions in vehicles equipped with SGW (Security Gateway) and SFD security systems. Designed for selected Autel diagnostic tools from the European distribution network, it enables service operations such as activations, adjustments, coding and calibrations.
Before purchasing, make sure your diagnostic tool comes from the European Autel distribution network, supports the EU PACK license and has an active main software update subscription.
SKU: MS.Autel.SGW.EU - Subscriptions
Autel SGW Unlock License – FCA Group – 1 Year
The Autel SGW FCA license provides access to protected diagnostic functions in FCA Group vehicles equipped with the SGW (Security Gateway) system. Designed for selected Autel diagnostic tools from the European distribution network, it enables service operations such as activations, adjustments, coding and calibrations.
Before purchasing, make sure your diagnostic tool comes from the European Autel distribution network, supports SGW unlocking for FCA Group vehicles and has an active main software update subscription.
SKU: MS.Autel.SGW.FCA - Subscriptions
Autel SGW Unlock License – VAG Group – 1 Year
The Autel SGW VAG license provides access to protected diagnostic functions in Volkswagen Group vehicles equipped with the SFD (Schutz Fahrzeug Diagnose) security system. Designed for selected Autel diagnostic tools from the European distribution network, it enables service operations such as activations, adjustments, coding and calibrations.
Before purchasing, make sure your diagnostic tool comes from the European Autel distribution network, supports SFD unlocking for VAG Group vehicles and has an active main software update subscription.
SKU: MS.Autel.SGW.VAG - Abrites, Car / LCV, Diagnostic tools
AVDI Plus – Abrites Diagnostic Interface
AVDI Plus is the latest generation of the Abrites Vehicle Diagnostics Interface, enhanced with additional communication options: CAN-FD and ENET, enabling compatibility with modern vehicles produced after 2018.
The device also features a more durable construction and an improved design. AVDI Plus retains all the core functions of the previous version while operating faster and more smoothly.
One of the key innovations is the ability to work simultaneously on multiple communication channels (CAN, K-Line, CAN-FD, Ethernet), which significantly simplifies and speeds up vehicle diagnostics and programming.
SKU: MS.AVDI.PLUS - Accessories adapters cables, AutoVEI – Truck Explorer
Cable AutoVEI DC2-OBD2 D165120003
The Autovei DC2-OBD2 cable is designed for Autovei DC2 diagnostic interfaces, such as the DirectConnect 2U. It allows the device to be powered directly from the vehicle’s OBD2 port, without the need for an external power supply.
The cable is designed for professional diagnostics and ECU programming, especially in trucks and commercial vehicles.
SKU: D165120003 - Accessories adapters cables, Cables bench, Magicmotorsport - Flex
Cable Bench BootROM for Cummins CM2350B – CM2450B FLX2.81
Accessories adapters cables, Cables bench, Magicmotorsport - FlexCable Bench BootROM for Cummins CM2350B – CM2450B FLX2.81
Cable for Cummins CM2350B and CM2450B (FLX2.81) controllers that can perform read and write operations. You can even use BootROM mode, available free of charge in Flex using the “Enable BootROM” function. Cummins BootROM mode allows recovery or programming in the event of a firmware failure, for example due to a damaged, incorrect, or incompatible file.
SKU: FLX2.81 - Accessories adapters cables, Cables, Cars/LCV, DFB Technology – DFOX
Cable DFOX Bench MD1CS006
Professional MD1CS006 Renault Bench Cable is an indispensable tool for tuners and workshops involved in engine control unit (ECU) programming and diagnostics. Designed specifically for MD1CS006 and MD1CS016 ECUs, used in 1.5L Blue dCi K9K-872 engines, it ensures a fast, safe, and stable connection to the control unit.
High-quality replacement.
SKU: MS.MD1CS006 - Accessories, Accessories adapters cables, BDM / Boot, Magicmotorsport - Flex, News
CAN FD Port E Adapter for Magicmotorsport FLEX – FLX4.4
Accessories, Accessories adapters cables, BDM / Boot, Magicmotorsport - Flex, NewsCAN FD Port E Adapter for Magicmotorsport FLEX – FLX4.4
The Magicmotorsport FLX4.4 is a CAN FD adapter designed to work with the FLEX programmer via Port E. It extends the device’s communication capabilities, allowing it to work with modern engine control units (ECUs) that use the CAN FD (Controller Area Network Flexible Data-Rate) protocol. CAN FD is an enhanced version of the traditional CAN bus, providing faster and more efficient data transmission. The adapter enables communication with supported ECUs found in newer vehicles.
SKU: FLX4.4 - Chassis dynamometer / HUB, Dynamometer, Dyno Revolt, News
Chassis dynamometer 2WD – Dyno Revolt DR2-B
Chassis dynamometer / HUB, Dynamometer, Dyno Revolt, NewsChassis dynamometer 2WD – Dyno Revolt DR2-B
The Dyno Revolt DR2-B is a high-performance 2WD (two-wheel drive) chassis dynamometer designed for professional automotive tuning and diagnostics. Manufactured by Dyno Revolt in Poland, this dynamometer is engineered to provide accurate and repeatable measurements for a wide range of vehicles.
SKU: MS.DYNO.DR2-B2WD - Car / LCV, Diagnostic tools, J2534, OEM, News
DiaLink J2534 – diagnostic interface
Universal J2534 adapter for ECU diagnostics and programming. Compatible with CombiLoader and third-party software. Supports CAN, K-Line, J1850, 12/24V. Fast, reliable, ideal for modern cars and trucks.
SKU: MS.DiaLink.J2534 - Accessories adapters cables, Car / LCV, Diagnostic tools, Universal
INTERFACE BMW INPA ENET V5.25 – Diagnostics, Coding, E-SYS, Series F, G, I
Accessories adapters cables, Car / LCV, Diagnostic tools, UniversalINTERFACE BMW INPA ENET V5.25 – Diagnostics, Coding, E-SYS, Series F, G, I
We offer the original BMW INPA ENET V5.25 diagnostic interface, designed for professional diagnostics and coding of F, G series vehicles and selected I series models. The product is new, CE marked, and guarantees high durability and trouble-free operation.
SKU: 5905999100654 - Accessories, Accessories adapters cables, Magicmotorsport - Flex, News
Korhex “F” Positioning Mask
Korhex “F” Positioning Mask is an additional attachment designed for the correct positioning of the Korhex antenna on the ECU during Boot Glitch procedures.
The product is an additional accessory for Korhex and is manufactured using 3D printing technology by M. S. Group.
SKU: MS.KRX04.001F - Launch EU, News, Subscriptions
Launch EU SGW Unlock License – Europe Package – 1 Year
The Launch EU SGW Package is a license package that provides access to protected diagnostic functions in FCA, Mercedes-Benz, Renault / Dacia and VAG vehicles equipped with the SGW (Security Gateway) system. The package is designed for selected Launch X-431 diagnostic tools from the European distribution network. It enables service operations that require authorization, such as coding, adaptations, activations and calibrations, depending on the functions supported by the vehicle and diagnostic tool.
SKU: MS.Launch.SGW.Pack - Car / LCV, Diagnostic tools, Launch EU
LAUNCH X431 O2-2 Scopebox
The LAUNCH X-431 O2-2 ScopeBox is a professional 4-channel automotive oscilloscope that expands the capabilities of compatible Launch X-431 diagnostic tools by providing detailed electrical signal analysis. The device allows users to monitor signal waveforms in real time, making it easier to identify faults in sensors, actuators and vehicle electronic systems.
SKU: MSG.launch.x431.o2.2 - Dash, Keys, Multitool, Multitool, Multitool, Programmers, SRS
Multitool UHDS FULL – Car Interface and Programmer SMOK
Dash, Keys, Multitool, Multitool, Multitool, Programmers, SRSMultitool UHDS FULL – Car Interface and Programmer SMOK
UHDS FULL is an advanced, multifunctional interface and programmer for SMOK automotive electronics. It allows comprehensive handling of ECU/TCU controllers, dashboards, immobilizers, and crash data systems, both via the OBDII port and in bench mode (on the workbench). With UHDS FULL, you can perform professional repairs, programming, and data reading on a wide range of vehicles.
SKU: MS.Multitool.UHDS.FULL - Electronic equipment, News, Oscilloscopes, Picoscope
NVH Advanced Kit in Carrying Case – PQ429
The Pico PQ429 NVH Advanced Kit is an advanced diagnostic kit designed for identifying noise, vibration and harshness (NVH) issues in vehicles. It allows technicians to analyze vibrations and sounds generated by mechanical components and helps locate the source of problems that can be difficult to identify using conventional diagnostic methods. The kit includes four PicoBNC+ three-axis accelerometers and four NVH microphones, allowing measurements to be taken at different locations on the vehicle and the recorded signals to be compared. It is particularly useful for diagnosing wheel bearings, suspension components, engine and transmission mounts, and other drivetrain components. With four accelerometers, it is possible to monitor vibrations at all four corners of the vehicle simultaneously during a single road test. This helps locate faults more quickly without repeatedly repositioning sensors and performing additional tests. All components are supplied in a carrying case, which provides convenient storage and protects the accessories during transport.
SKU: MS.PQ429


























